Prof. Kamal Hassan
Professor of Engineering Mathematics
Building: A 045

Professor Kamal obtained B.Sc. in Mechanical Engineering in 1972 from the Military Technical College (M.T.C), Egypt. Followed by a Diploma in applied mathematics in 1977 at Paul Sabatier University in Toulouse France. Then in 1979, Prof. Kamal received his Ph.D. in Mathematics & Mechanics science, from the same school. Prof. Kamal had a passion for research and worked in many research institutes

Education
  • 1972 B.Sc. Mechanical Engineering, Military Technical College (M.T.C), Egypt
  • 1972-1976: Teaching Assistant, Department of Mathematics, M.T.C
  • 1973-1976: Equivalent Studies to B.Sc. in Mathematics, Military Technical College (M.T.C)
  • 1976-1977: Research Assistant, Paul Sabatier University, Toulouse, France.
  • 1977 Diploma in applied mathematics, Paul Sabatier University, Toulouse France
  • 1977-1979: Research Engineer, EDF (Electricité de France), Chatou, and IRIA (Insitut de Recherche en Informatique et en Automatique), Le Chesnay, France.
  • 1979 Ph.D. Mathematics & Mechanics science, Paul Sabatier University, Toulouse France. Thesis title: les élements finis du type Hsieh-Clough-Tocher pour le probléme de coque. (Finite elements of type Hsieh-Clough-Tocher for shell problem).
  • 1980-1984: Lecturer of Mathematics at the Department of Mathematics - M.T.C. & Department of Mechanical Engineering - Faculty of Engineering - Zagazig University -Faculty of Engineering and Faculty of Science - Menofia University.
  • 1984-1985: Investigator, Space Research Center in Astronautics.
  • 1985-1986: Research Engineer at O.S.U. (Ohio State University), Civil and Mechanical Engineering Department, Columbus, Ohio, U.S.A.
  • 1985-1989: Researcher, Space Researches Center.
  • 1989-1990: Researcher, Special projects.
  • 1990-2007: Studies of Defense Systems Center (SDSC) and the Arab Organization for Industrialization (A.O.I) (ABD, Engines, Kader factories).
  • 2007-2009: Dean of Arab Institute for Advanced Technology, (A.I.A.T). Arab Organization for Industrialization (A.O.I).
  • 2010-2014: Part-Time Professor of Engineering Mathematics, High Institute of Engineering (H.I.E.), El-Shorouk Academy.
  • 2011-2014: Part-Time Professor of Mathematics at Misr International University (M.I.U.).
  • 2014-up till now: Full-Time Professor at the British University in Egypt.
Journal Articles
  • Hassan, "Sur les éléments finis du type Hsieh-Clough-Tocher complet et réduit". Séminaires de Mathemtiques Appliques, Paul Sabatier Université, Toulouse, France, 1978.
  • Hassan, "Application of reduced integration in linear shell problems", Rapports de Recherche, I. R. I. A., No. 362, (1979).
  • Bernadou, J. M. Boisserie, and K. Hassan, "Sur l'implémentation des éléments finis de Hsieh-Clough- Tocher complet et réduit", Rapports de recherche, I. N. R. I. A., No. 4, (1980).
  • Bernadou and K. Hassan, "Basis functions for general HCT triangles, complete or reduced", Rapports de recherché I. N. R. I. A., No. 5, (1980).
  • Hassan, "Application of lower-order integration schemes in linear shell problems", Computer Methods in Applied Mechanics and Engineering, No. 25, (1981), pp. 279-286.
  • Bernadou and K. Hassan, "Basis functions for general HCT triangles, complete or reduced", International Journal for Numerical Methods in Engineering, Vol. 17, (1981). pp. 773 - 795.
  • Abdalla and K. Hassan, "Shape effect on Morley's element", Communications in Applied Numerical Methods, Vol. 1, (1985), pp. 255-259.
  • Hassan and F. F. Mahmoud, "An incremental approach for the solution of quadratic programming problems", Fifth Int. Conf. on Mathematical Modeling, 29-31 July 1985, Univ. of California, Berkeley, California.
  • Hassan, H. Bushy, and D. Houser, "Modeling of gear tooth by thick plate", Second A. M. E. Conf., 6-8 May 1986. MTC, Cairo, Egypt, MDP-2, pp. 13-23.
  • Abdalla and K. Hassan, "Effect of shear deformations on the bending of moderately thick plates", Second Conf., 6-8 May 1986, MTC, Cairo, Egypt, MDP-6, pp.55-63.
  • Hassan, "Thickness effect on the spectral properties of thick plates", Third Int. Conf. PEDAC, Dec. 12-14, 1986, Alexandria, and with little modifications in Commun. Appl. Numer. Methods, Vol. 4, pp. 1-4, 1988.
  • Abdalla and K. Hassan, "A Simple curved element for simply supported plates", Second ASAT Conference, 21-23 April 1986, MTC, Cairo, Egypt, ST-3, pp. 499-505.
  • Abdalla and K. Hassan, "On the Bergan-Wang approach for moderately thick plates, Commun. Appl. Numer. Methods, Vol. 4, pp. 51-58, 1988.
  • Hassan and N. Sarigul, "A Study of the influence of the angle condition on plate bending of triangular finite elements", Commun. Appl. Numer. Methods, Vol. 4, pp. 79-83, 1988.
  • F. Mahmoud, A. A. El-Sharkawy and K. M. Hassan, "Contour design for contact stress minimization by interior penalty method", Appl. Math. Modeling, Vol. 13, pp. 596-599, 1989.
  • F. Mahmoud, A.K. Al-Saffar and K. M. Hassan, "An adaptive incremental approach for the solution of convex programming models", Mathematics and Computers in Simulation 35, pp. 501-408, 1993.
  • Hassan, "Linear solution of the problem of panel flutter", Mech. Struct. & Mach., 22 (1), pp. 37-47, 1994.
  • O. El-Nady, H.M. Negm and K. M. Hassan, Analysis of general shells of revolution using Chebyshev series, J.Engng, and Appl. Sci., vol. 52, No.4, Aug. 2005, pp. 797-814.
  • Hassan, S. Guirguis, and H. El-Hamouly, "Bending of an elastic rectangular clamped plate using Bergan-Wang approach”, Journal of Engineering Research Vol. 5(1), pp. 7-17, February 2017.
  • Hassan, S. Guirguis, and H. El-Hamouly,” Bergan-Wang Solution of Clamped Moderately Thick Rectangular Plates, Journal of Mathematics and System Science 7, 2017, pp. 164-173.
  • Hassan, S.Guirguis, and H.El-Hamouly,” BERGAN-WANG SOLUTION OF CLAMPED MODERATELY THICK RECTANGULAR PLATES”, WCCM XII & APCOM VI, held from 24 to 29 July in 2016 at Coex in Seoul, Republic of Korea.

 

 

 

 

 

 

Conference Papers
  • Hassan, "Practical conforming finite elements for the solution of shell problem", Proc. of the Second Cairo University, MDP conference, 27-29 December 1982, Cairo, Egypt. Supplement Volume: pp. 1-8.
  • Abdalla and K. Hassan, "Dynamic performance of plate bending element of Morley", Third AME Conference, 12-14 April 1988, M. T. C., Cairo, Egypt, MDB-8, pp. 75-85.
  • Hassan, "Performance of straight-sided finite elements in simply supported curved-edged thin plates", Fourth ASAT Conference, 14-16 May 1991, MTC, Cairo, Egypt, pp. 251-260, and in Computers & Structures, Vol. 45, No. 3, pp. 583-586, 1992.
  • Hassan, "A Quadratic curved side element for simply supported thin curved plates", Proceedings of International Conference on Military Technologies ICMT'09, Brno, Czech Republic, May 5-6,2009.
  • Hassan, "Approximate inclusion of shear effect on plate deflection", proceedings of thirteenth International Conference on Aerospace Sciences & Aviation Technology, ASAT, 2009, Cairo, Egypt, May 26-28, 2009.
  • Hassan,” Modern Strategies in Product Life Cycle Simulation”, Proceedings of Thirteenth International Conference on Aerospace Sciences & Aviation Technology, Work Shop Part, ASAT, 2011, Cairo, Egypt, May 24-26, 2011.
  • Hassan, E.Ali, and M.Tawfik,” A finite element solution of Bergan-Wang plate model”, ASAT-18, held from April,9-11,2019 at MTC, Cairo, Egypt.
Fields of Interests
Numerical Analysis - Finite Elements - Structures (plates and shells).
Position
Professor of Engineering Mathematics
Responsibilities
Teaching - Research