Prof. Mostafa Shazly
Professor
207 Building A

Dr. Mostafa Shazly is a Professor at the Mechanical Engineering Department, Director, Centre of Advanced Materials, the British University in Egypt. He received his B.Sc. and M.Sc. in Mechanical Design and Production Engineering from Faculty of Engineering, Cairo University in 1996 and 1999, respectively. He received his Ph.D. in Mechanical Engineering in 2005 from Case School of Engineering, Case Western Reserve University, OH, USA. Dr. Shazly received Case Prime Fellowship from Case Western Reserve University, OH, USA. Prior to his appoint at BUE, Dr. Shazly was a Research Associate at Mechanical and Aerospace Engineering Department, Case Western Reserve University, Senior Research Engineer at Goodyear Tire and Rubber Company, Akron, OH, USA and Assistant Professor at Faculty of Engineering, Cairo University. He is a member of the American Society of Mechanical Engineers and participates in industrial consultations and training through BUE and Cairo University.

Education

Ph.D in Mechanical Engineering, Case Western Reserve University, Ohio, USA, 2005.  M.Sc in Mechanical Design and Production Engineering, Cairo University, 1999  B.Sc in Mechanical Design and Production Engineering, Cairo University, 1996

Research Interests

High Strain Rate Deformation of Materials
Finite elements analysis
Sheet metal forming
Mechanics of composite materials Design and fabrication of Wind turbine blades Fratcure Mechanics

Journal Articles

M Shazly, Y Bahei-El-Din, S Salem, “Characterization of sandwich panels for indentation and impact”, Journal of Physics: Conference Series 451 (1), 012001, July 2013.

Mostafa Shazly, Bishoy Dawood, Abdalla Wifi, Alaa ElMokadem, “Effect of blank holder force schemes on weld-line movements in u-draw bending of tailor welded blank”, The North American Manufacturing Research Institution of SME (NAMRI/SME) 41st NAMRC - An International Forum. The University of Wisconsin-Madison from June 10-14, 2013, in Madison, Wisconsin, USA, Paper No. NAMRC41-1530.

Tamer F. Abdelmaguid, Ragab K. Abdel-Magied, Mostafa Shazly, Abdalla S. Wifi, “A Dynamic Programming Approach For Minimizing The Number Of Drawing Stages And Heat Treatments In Cylindrical Shell Multi-Stage Deep Drawing”, Computers & Industrial Engineering Journal, In Press, http://dx.doi.org/10.1016/j.cie.2012.10.004.

Ahmed R. Alian, Mostafa Shazly, and Mohammad M. Megahed, “Finite Element simulation of In-Service Sleeve Repair Welding of Gas Pipelines”, Applied Mechanics and Materials; Vols. 313-314 (2013) pp 957-961, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.313-314.95

Alaa Mohamed , Tarek Osman, Ali Khattab, Mostafa Shazly, “Computer Aided Design and Optimization of Hypoid Gears”, The International Conference on Engineering and Technology (ICET 2012), German University in Cairo, 10-11 Oct., 2012. Tamer F. Abdelmaguid, Ragab K. Abdel-Magied, Mostafa Shazly, Abdalla S. Wifi, “A Combined Dynamic Programming / Finite Element Approach for the Analysis and Optimization of Multi-Stage Deep Drawing of Box-Shaped Parts”, Proceedings of NAMRI/SME, Vol. 40, 2012 June 4-8, 2012, in Notre Dame, Indiana.

Tamer F. Abdelmaguid, Ragab K. Abdel-Magied, Mostafa Shazly, Abdalla S. Wifi, “A Dynamic Programming Approach For Minimizing The Number Of Drawing Stages And Heat Treatments In Cylindrical Shell Multi-Stage Deep Drawing” Proceedings of the 41st International Conference on Computers & Industrial Engineering, 23-25 Oct, 2011, California, USA.

Y. Bahei-El-Din, M. Shazly, S. Salem, A. Abd El-Rahman, “On Quasi-static Indentation of Composite Laminates and Sandwich Structures,” Proceedings of the European Wind Energy Conference and Exhibition (EWEA2011), 14-17 March 2011, Brussels, Belgium.

Abdalla S. Wifi, Ragab Abdel-Mageid, Attia Gomaa, and Mostafa Shazly, “A rule-based process design and finite element analysis of multistage deep drawing of box shapes” ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010- Vancouver, British Columbia, IMECE2010-40992

Yehia Bahei-El-Din, Mostafa Shazly, Islam El-Habbal, Yamen Elbahy; “MODIFIED SANDWICH STRUCTURES FOR IMPROVED IMPACT RESISTANCE OF WIND TURBINE BLADES”, European Wind Energy Conference & Exhibition; Paper # 212, 20-23 April 2010, Warsaw, Poland.

Dissertations Supervised

Friction Stir Welding of Polymeric Sheets

Friction Stir Welding of Stainless Steel

Impact Resistance of Paper Core Sandwich Panels

Research Collaboration

2009-11 Junior Investigator, "Sandwich Structures for Wind Turbine Blades", Research and Development Innovation Fund, PI: Prof. Yehia Bahei-El-Din

2010-12 Principal Investigator, "Mechanics of Friction Stir Welding", Science and Technology Development Fund, Project #1903.

2011-15 Junior Investigator, "Design, Fabrication, and Certification of 850 kW Turbine Blade", Science and Technology Development Fund, Project #1439., PI: Prof. Yehia Bahei-El-Din.

Fields of Interests
High Strain Rate Deformation of Materials Finite elements analysis Sheet metal forming Mechanics of composite materials Design and fabrication of Wind turbine blades Fratcure Mechanics High Strain Rate Deformation of Materials Finite elements analysis Sheet metal forming Mechanics of composite materials Design and fabrication of Wind turbine blades Fratcure Mechanics
Research Projects
2009-11 Junior Investigator, "Sandwich Structures for Wind Turbine Blades", Research and Development Innovation Fund, PI: Prof. Yehia Bahei-El-Din 2010-12 Principal Investigator, "Mechanics of Friction Stir Welding", Science and Technology Development Fund, Project #1903. 2011-15 Junior Investigator, "Design, Fabrication, and Certification of 850 kW Turbine Blade", Science and Technology Development Fund, Project #1439., PI: Prof. Yehia Bahei-El-Din.
Responsibilities
Director, Centre for Advanced Materials Associate Director, Institutional Planning and Development Unit (IPDU) Chairman, Campus Development Committee Director, Centre for Advanced Materials Associate Director, Institutional Planning and Development Unit (IPDU) Chairman, Campus Development Committee
Publications
M Shazly, Y Bahei-El-Din, S Salem, “Characterization of sandwich panels for indentation and impact”, Journal of Physics: Conference Series 451 (1), 012001, July 2013. Mostafa Shazly, Bishoy Dawood, Abdalla Wifi, Alaa ElMokadem, “Effect of blank holder force schemes on weld-line movements in u-draw bending of tailor welded blank”, The North American Manufacturing Research Institution of SME (NAMRI/SME) 41st NAMRC - An International Forum. The University of Wisconsin-Madison from June 10-14, 2013, in Madison, Wisconsin, USA, Paper No. NAMRC41-1530. Tamer F. Abdelmaguid, Ragab K. Abdel-Magied, Mostafa Shazly, Abdalla S. Wifi, “A Dynamic Programming Approach For Minimizing The Number Of Drawing Stages And Heat Treatments In Cylindrical Shell Multi-Stage Deep Drawing”, Computers & Industrial Engineering Journal, In Press, http://dx.doi.org/10.1016/j.cie.2012.10.004. Ahmed R. Alian, Mostafa Shazly, and Mohammad M. Megahed, “Finite Element simulation of In-Service Sleeve Repair Welding of Gas Pipelines”, Applied Mechanics and Materials; Vols. 313-314 (2013) pp 957-961, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.313-314.95 Alaa Mohamed , Tarek Osman, Ali Khattab, Mostafa Shazly, “Computer Aided Design and Optimization of Hypoid Gears”, The International Conference on Engineering and Technology (ICET 2012), German University in Cairo, 10-11 Oct., 2012. Tamer F. Abdelmaguid, Ragab K. Abdel-Magied, Mostafa Shazly, Abdalla S. Wifi, “A Combined Dynamic Programming / Finite Element Approach for the Analysis and Optimization of Multi-Stage Deep Drawing of Box-Shaped Parts”, Proceedings of NAMRI/SME, Vol. 40, 2012 June 4-8, 2012, in Notre Dame, Indiana. Tamer F. Abdelmaguid, Ragab K. Abdel-Magied, Mostafa Shazly, Abdalla S. Wifi, “A Dynamic Programming Approach For Minimizing The Number Of Drawing Stages And Heat Treatments In Cylindrical Shell Multi-Stage Deep Drawing” Proceedings of the 41st International Conference on Computers & Industrial Engineering, 23-25 Oct, 2011, California, USA. Y. Bahei-El-Din, M. Shazly, S. Salem, A. Abd El-Rahman, “On Quasi-static Indentation of Composite Laminates and Sandwich Structures,” Proceedings of the European Wind Energy Conference and Exhibition (EWEA2011), 14-17 March 2011, Brussels, Belgium. Abdalla S. Wifi, Ragab Abdel-Mageid, Attia Gomaa, and Mostafa Shazly, “A rule-based process design and finite element analysis of multistage deep drawing of box shapes” ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010- Vancouver, British Columbia, IMECE2010-40992 Yehia Bahei-El-Din, Mostafa Shazly, Islam El-Habbal, Yamen Elbahy; “MODIFIED SANDWICH STRUCTURES FOR IMPROVED IMPACT RESISTANCE OF WIND TURBINE BLADES”, European Wind Energy Conference & Exhibition; Paper # 212, 20-23 April 2010, Warsaw, Poland.