Research

(November 2014 – December 2017)

Published Papers

1. Othman, A. A. E. and Sorial, M. H. H. (2017). Achieving Competitive Advantage through the Integration of Disabled Architects In Architectural Design Firms In Egypt. Organisation, Technology and Management in Construction: An International Journal, Vol. (9), No. (1), pp. 1457-1558.

2. Salama E., Soliman H.A., Youssef G.M., Sara Hamad, (2017) “Thermoluminescence Properties of Synthetic Borosilicate Glass Doped with ZnO”, Journal of Luminescence 186:164–169.

3. W. M. Abdellah, H. M. Diab, S. U. El-Kameesy, E. Salama & S. El-Framawy (2017) “Natural radioactivity levels and associated health hazards from the terrestrial ecosystem in Rosetta branch of the River Nile, Egypt” Isotopes in Environmental and Health Studies 53(4):427-439.

4. Salama E. et al., (2017) “Coherent J/ψ photoproduction in ultra-peripheral PbPb collisions at √sNN=2.76TeV with the CMS experiment” Physics Letters B, Volume 772, 10 September 2017, Pages 489-511.

5. Salama E. et al., (2017) “Measurement of the tt¯production cross section using events with one lepton and at least one jet in pp collisions at s√=13TeV” Journal of J. High Energ. Phys., Volume 2017, Number 9, Page 1.

6. Salama E. et al., (2017) “Search for top quark partners with charge 5/3 in proton-proton collisions at s√=13 TeV” J. High Energ. Phys. Volume 2017, Number 73, Page 1.

7. Salama E. et al., (2017) “Measurement of the inclusive energy spectrum in the very forward direction in proton-proton collisions at s√=13 TeV” J. High Energ. Phys. Volume 2017, Number 46, Page 1.

8. Salama E. et al., (2017) “Erratum to: search for dark matter in proton-proton collisions at 8 TeV with missing transverse momentum and vector boson tagged jets” J. High Energ. Phys. Volume 2017, Number 35, Page 1.

9. Salama E. et al., (2017) “Searches for W′ bosons decaying to a top quark and a bottom quark in proton-proton collisions at 13 TeV” J. High Energ. Phys. Volume 2017, Number 29, Page 1.

10. Salama E. et al., (2017) “Search for new physics with dijet angular distributions in proton-proton collisions at s√=13 TeV” J. High Energ. Phys. Volume 2017, Number 13, Page 1.

11. Salama E. et al., (2017) “Search for dark matter produced with an energetic jet or a hadronically decaying W or Z boson at s√=13 TeV” J. High Energ. Phys. Volume 2017, Number 14, Page 1.

12. Salama E. et al., (2017) “Measurement of electroweak-induced production of Wγ with two jets in pp collisions at s√=8 TeV and constraints on anomalous quartic gauge couplings” J. High Energ. Phys. Volume 2017, Number 106, Page 1.

13. Salama E. et al., (2017) “Search for Charged Higgs Bosons Produced via Vector Boson Fusion and Decaying into a Pair of W and Z Bosons Using pp Collisions at s√=13 TeV” Phys. Rev. Lett. 119, 141802 (2017) - Published 4 October 2017.

14. Salama E. et al., (2017) “Search for Low Mass Vector Resonances Decaying to Quark-Antiquark Pairs in Proton-Proton Collisions at √s=13  TeV” Phys. Rev. Lett. 119, 111802 (2017) - Published 15 September 2017.

15. Salama E. et al., (2017) “Search for leptophobic Z′ bosons decaying into four-lepton final states in proton–proton collisions at √s=8TeV” Physics Letters B, Volume 773, 10 October 2017, Pages 563-584.

16. Salama E. et al., (2017) “Search for standard model production of four top quarks in proton–proton collisions at √s=13TeV” Physics Letters B, Volume 772, 10 September 2017, Pages 336-358.

17. Salama E. et al., (2017) “Search for anomalous couplings in boosted WW/WZ→ℓνq¯q production in proton–proton collisions at √s=8TeV” Physics Letters B, Volume 772, 10 September 2017, Pages 21-42.

18. Salama E. et al., (2017) “Measurement of the cross section for electroweak production of Zγ in association with two jets and constraints on anomalous quartic gauge couplings in proton–proton collisions at √s=8TeV” Physics Letters B, Volume 770, 10 July 2017, Pages 380-402.

19. Salama E. et al., (2017) “Search for heavy gauge W′ bosons in events with an energetic lepton and large missing transverse momentum at √s=13TeV” Physics Letters B, Volume 770, 10 July 2017, Pages 278-301.

20. Salama E. et al., (2017) “Measurement of the mass difference between top quark and antiquark in pp collisions at √s=8TeV” Physics Letters B, Volume 770, 10 July 2017, Pages 50-71.

21. Salama E. et al., (2017) “Suppression of ϒ(1S), ϒ(2S), and ϒ(3S) quarkonium states in PbPb collisions at √sNN=2.76TeV” Physics Letters B, Volume 770, 10 July 2017, Pages 357-379.

22. Salama E. et al., (2017) “Search for supersymmetry in events with photons and missing transverse energy in pp collisions at 13 TeV” Physics Letters B, Volume 769, 10 June 2017, Pages 391-412.

23. Youssef, I. K., Eldewaik, M. H., “Solving Poisson’s Equations with fractional order using Haarwavelet”, Applied Mathematics and Nonlinear Sciences, Vol.2, 271–284, June-2017, ISSN 2444-8656.

24. Youssef, I.K., Eldewaik, M. H., Haar Wavelet Solution of Poisson’s Equation and Their Block Structures, American Journal of Mathematics and Computer Modelling, Vol.2, March-2017, doi: 10.11648.

25. Mohie El-Din, M. & Emam, W. “Prediction of generalized order statistics based on some accelerated data using the tampered failure rate model ", in Journal of Statistics Applications & Probability, Pro. 6, No. 3, 1-8 (2017).

26. Al-Akraa, IM. (2017) “Efficient electro-oxidation of formic acid at Pd-MnOx binary nanocatalyst: Optimization of deposition strategy”, International Journal of Hydrogen Energy, Vol. 42 Issue 7, pp.4660 – 4666.

27. Al-Akraa, I.M., Mohammad A.M, El-Deab M.S., El-Anadouli B.E. (2017) “Flower-shaped gold nanoparticles: Preparation, characterization, and electrocatalytic application”, Arabian Journal of Chemistry, Vol. 10 Issue 6, pp.877 – 884.

28. Aboelazayem, O., Gadalla, M., Saha B. (2017) “Biodiesel production from waste cooking oil via supercritical methanol: optimisation and reactor simulation,” Renewable Energy, In press, June 23, DOI:10.1016/j.renene.2017.06.076.

29. Aboelazayem, O., Gadalla, M., Saha B. (2017) “An experimental-based energy integrated process for biodiesel production from waste cooking oil using supercritical methanol,” Chemical Engineering Transactions, Vol. 61, p. 1645-1650. DOI:10.3303/CET1761272

30. E.A. Soliman, M.A. Radwan, M.M. El-Dessouky and I.M.M. El-Dessouky, (2017) “A Study on the Preparation and Adsorption Properties of Active Carbon from Peach Kernel”, Journal of Environmental Science, ISSN 1110-0826, Vol. 37 Issue 2 , pp. 1-13.

31. Remon A. Mankarious, Mostafa A. Radwan , Mostafa Shazly, Hany A. Elazab,(2017)“ Bulletproof Vests/Shields Prepared from Composite Material Based on Strong Polyamide Fibers and Epoxy Resin” Journal of Engineering and Applied Science Vol 12 Issue 10,pp. 2697-2701.

32. Walaa H. Mahmoud, Mostafa M.H Khalil, Hoda A. Elsawy, Gehad G. Mohamed, Mostafa A. Radwan, (2017)“Preparation, Characterization and Biological Activity Evaluation of some Metal Complexes from Novel Schiff Bases based on Ambroxol Drug, International Journal of dvanced Scientific Research and Management, Vol. 2 Issue 8.

33. Sherif Elbasuneya, M. Gaber Zakya, Mostafa A Radwan, Sherif F. Mostafa,(2017) “Stabilized super-thermite colloids: A new generation of advanced highly energetic materials, Applied Surface Science 419, pp. 328–336 .

34. Hany A. Elazab, S. Moussa, Kendra Woodberry, B. Frank Gupton, and M. Samy El-Shall, (2017)“Microwave-Assisted Synthesis of Pd/Fe3O4 Nanoparticles under flow reaction conditions: A Highly Magnetic and Efficient Catalyst for CO Oxidation”, Journal of Green Processing and Synthesis (GREENPS), Volume 6, Issue 4, pp. 413.

35. Hany A. Elazab, S. Moussa, Ali Siamaki, B. Frank Gupton, and M. Samy El-Shall, (2017)“The Effect of Graphene on catalytic performance of Palladium Nanoparticles decorated with Fe3O4, Co3O4, and Ni (OH)2 : Potential Efficient Catalysts for Suzuki Cross-Coupling”, Catalysis Letters, Vol 147, Issue 6, pp 1510–1522.

36. Kamel, D., Gadalla, M., Ashour, F. (2017) “Analysis and revamping of heat exchanger networks for crude oil”, Clean Technologies and environmental policy, DOI 10.1007/s10098-017-1403-4.

37. Walaa H. Mahmoud, Mostafa M.H Khalil, Hoda A. Elsawy, Gehad G. Mohamed, Mostafa A. Radwan (2017) “Preparation, Characterization and Biological Activity Evaluation of some Metal Complexes from Novel Schiff Bases based on Ambroxol Drug” International Journal of Advanced Scientific Research and Management, Vol. 2 Issue 8, pp.98-111.

38. Muhammad Ajmal Azad, Junaid Arshad, Mohammad M. Abdellatif (2017) ‘COLIDE: Novel Framework for Collaborative Intrusion Detection for Internet of Things’. Computers & Security Journal.

39. Hanan M. Amer, Hamdi A. A. Elmikati, Fatma E.Z. Abou-Chadi, Sherif S. Kishk and Marwa I. Obayya (2017) “Automatic Detection of Human's Lung Nodules Using an Optimal Gray Level Threshold” International Journal of Scientific & Engineering Research (IJSER), Vol. 8, No. 6, pp. 1646-1652.

40. El-sayed H.M., Lotfy M., El-din Zohny H.N., Riad H.S. (July 2017) “Prediction of fatigue crackinitiation life in railheads using finite element analysis”, Ain Shams Engineering Journal; hosted by Elsevier, http://dx.doi.org/10.1016/j.asej.2017.06.003

41. ElDomiaty, T., Soliman, A. & Anis, M. (2016) “The Financial Aspects of Corporate Responsibility Index in Egypt: A Quantitative Approach to Institutional Economics”, International Journal of Social Economics, Vol. 43 Issue 3, pp.284 – 307.

42. Adham Naji and Paul Warr (2016) “Proof of Perturbational Duality between Classical Cavities and Planar Resonators with Magnetic Side-Walls”, IEEE Microwave and Wireless Components Letters, Vol. 26, Issue 7, pp. 469–471.

43. Lim, K., Bastawrous, H.A., Duong, V.-H., See, K.W., Zhang, P., Dou, S.X., “Fading Kalman filter-based real-time state of charge estimation in LiFePO4 battery-powered electric vehicles,” Applied Energy Journal, vol. 169, pp. 40-48, 1 May 2016. (IF = 5.75).

44. Hosam A. Shawky, Amr A. Abdel Fatah, Moustafa M. S. Abo ElFad, Abdel Hameed M. El-Aassar (2016): ”Design of a Small Mobile PV Driven RO Water Desalination Plant to be Deployed at the North West Coast of Egypt” Desalination and Water Treatment, Volume 55, Number 13.Publishe September, 22, 2015

45. M. Refat • A. Elashery • S. Toschi • I. El- Mahallawi • L. Ceschini; (2016): “Microstructure, Hardness and Impact Toughness of Heat-Treated Nanodispersed Surface and Friction Stir-Processed Aluminum Alloy AA7075”, Journal of Materials Engineering and Performance JMEP, 2016, online first 1-15. Cite this article as: Refat, M., Elashery, A., Toschi, S. et al. J. of Materi Eng and Perform (2016). doi:10.1007/s11665-016-2346-3

46. Salama E. et al. (2016) “Search for new physics with the M T2 variable in all-jets final states produced in pp collisions at √s=13 TeV”, Journal of High Energy Physics, vol. 2016, issue 10.

47. Salama E. et al. (2016) “Measurement of the Zγ→νν‾γ production cross section in pp collisions at s=8 TeV and limits on anomalous ZZγ and Zγγ trilinear gauge boson couplings”, Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, vol. 760.

48. Salama E. et al. (2016), “Search for s channel single top quark production in pp collisions at √s = 7 and 8 TeV”, Journal of High Energy Physics, vol. 2016, issue 9.

49. Salama E. et al. (2016), “Measurement of the double-differential inclusive jet cross section in proton–proton collisions at √s = 13 TeV” European Physical Journal C, vol. 76, issue 8.

50. Salama E. et al. (2016), “Azimuthal decorrelation of jets widely separated in rapidity in pp collisions at √s = 7 TeV” Journal of High Energy Physics, vol. 2016, issue 8 (2016).

51. Salama E. et al. (2016), “Measurement of the t t ¯ production cross section in the eμ channel in proton-proton collisions at √s = 7 and 8 TeV” Journal of High Energy Physics, vol. 2016, issue 8 (2016).

52. Salama E. et al. (2016), “Search for new physics in same-sign dilepton events in proton–proton collisions at √s = 13 TeV” European Physical Journal C, vol. 76, issue 8 (2016).

53. Salama E. et al. (2016), “Search for Narrow Resonances in Dijet Final States at s =8 TeV with the Novel CMS Technique of Data Scouting” Physical Review Letters, vol. 117, issue 3 (2016).

54. Salama E. et al. (2016), “Measurement of t t ¯ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at √s = 8 TeV”. European Physical Journal C, vol. 76, issue 7.

55. Salama E. et al. (2016), “Measurement of the CP-violating weak phase φs and the decay width difference δΓc using the Bs0→J/ψφ (1020) decay channel in pp collisions at √ s=8 TeV” Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, vol. 757 (2016).

56. Salama E. et al. (2016), “Search for neutral MSSM Higgs bosons decaying to μ+μ- in pp collisions at √s=7 and 8 TeV” Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics, vol. 752.

57. Salama E. et al. (2016), “Search for the production of an excited bottom quark decaying to tW in proton-proton collisions at (Formula Presented.) TeV. Journal of High Energy Physics, vol. 2016, issue 1.

58. Ismail Humeid and F.E.Z. Abou-Chadi (2016): “Image Contrast Enhancement Techniques: A Comparative Study of Performance”, 137 (13): 43-48, March 2016.

59. Mostafa Mohammed Mohie El-Din, Walid Sayed Emam (2016): Prediction of generalized order statistics from two indpendent sequances, IJASP, 4, 2016, 36 - 46.

60. A.S. Al-Fatesh, A. Amin • A.A. Ibrahim, W.U. Khan, M.A. Soliman, R.L. AL-Otaibi, A.H. Fakeeha (2016): "Effect of Ce and Co Addition to Fe/Al2O3 for Catalytic Methane Decomposition", Catalysts, 6 (3), (40) 1-15, 2016.

61. Lim, K., Bastawrous, H.A., Duong, V.-H., See, K.W., Zhang, P., Dou, S.X., (2016): “Fading Kalman filter-based real-time state of charge estimation in LiFePO4 battery-powered electric vehicles” Applied Energy Journal, vol. 169, pp. 40-48, 1 May 2016. (Impact Factor = 5.61) in 2014/2015 © Thomson Reuters Journal Citation Reports, 2015. Available online from: http://www.sciencedirect.com/science/article/pii/S0306261916300848

62. Khalil, Husam, Beleha, Emad, & Mortada, Hesham (2016): Urban conservation of the historic city of Jugol, Ethiopia: a syntactic approach. WIT Transactions on the Built Environment. Vol. 159, June 2016.

63. Khaled Dewidar, (2016): Living Architecture”The new Architecture Modernism”, Journal for Building Research, Febraury 2016.

64. Othman, A.A.E. and Halim, A. S.A. (2015). “Knowledge Management: A Novel Approach ForImproving the Performance of Architectural Design Organisations In Egypt”. Emirates Journal for engineering Research. Vol. (20), No. (1), pp. 1-16.

65. Othman, A.A.E. (2015). “An International Index for Achieving Customer Satisfaction in the Construction Industry”, International Journal of Construction Management, Vol. 13, No. (1), pp. 33-58.

66. Othman, A.A.E., Balaha, F. I.H. and fester, F. (2015). “Using Risk Management in the Re-Design Process for Re-Use of Existing Buildings”, Journal of construction, Vol. (8), No. (3), pp. 14-20.

67. Mostafa Mohammed Mohie El-Din, Mohammed Sayed Kotb, Walid Sayed Emam (2015): “Prediction intervals for future order statistics from two independent sequences, AJTAS, 4 (2015) 33 - 40.

68. Mostafa Mohammed Mohie El-Din, Mohammed Sayed Kotb, Walid Sayed Emam (2015): “Prediction intervals for progressive Type-II right-censored order statistics, AJTAS, 4 (2015) 329 - 338.

69. Mostafa Mohammed Mohie El-Din, Walid Sayed Emam (2015): “Prediction of generalized order statistics based on ordinary order statistics”, BOMSR, 3 (2015) 205 - 215.

70. A.T. Khalil, F.E.Z. Abou-Chadi (2015): “Iris Verification Using Data Fusion”, International Journal of VLSI & Signal Processing (SSRG-IJVSP), ISSN: 2394 – 2584, August 2015.

71. Mohammed Hussein and Safaa Diab (2015): “Developing visually inspection approaches for geometric characteristics with known tolerances”, Int. J. Collaborative Enterprise, Vol.5, No. 1/2, 2015.

72. Sobh, A.S., Salem, S.A., Darwish, R., Hussein, M. and Karam, O. (2015) ‘Unsupervised clustering of materials properties using hierarchical techniques’, Int. J. Collaborative Enterprise, Vol. 5, Nos. 1/2, pp.74–88.

73. Sayed Y. Akl, Ahmed A. Abdel-Rehim (2015): “Condition Monitoring of a Gear- Box Using Wear Particle Analysis Technique”, Advanced Materials Research Vol. 1125 (2015) pp 511-515

74. Hany A. Elazab, Ali Siamaki, S. Moussa, B. Frank Gupton, M. S. El-Shall (2015): "Highly Efficient and Magnetically Recyclable Graphene-Supported Pd/Fe3O4 Nanoparticle Catalysts for Suzuki and Heck Cross-Coupling Reactions", Journal of Applied Catalysis A: General, Volume 491, Pages 58-69, 5 February 2015.

75. A.A. Ibrahim, A.S. Al-Fatesh, W.U. Khan, M.A. Soliman, R.L. AL Otaibi , A.H. Fakeeha (2015): "Thermo-catalytic Methane Decomposition: A review of State of the art of catalysts", Journal of the Chemical Society of Pakistan, 37 (06), 1280-1308 (2015).

76. A.H. Fakeeha, W.U. Khan, A.A. Ibrahim, R.L. Al-Otaibi, A.S. Al-Fatesh, M.A. Soliman, A.E. Abasaeed (2015): "Alumina Supported Iron Catalyst for Hydrogen Production: Calcination Study", International Journal of Advances in Chemical Engineering and Biological Sciences, 2 (2), 139-141 (2015)

77. M.A. Soliman, Y. Al-Zeghayer (2015): "Approximate Analytical Solution for the Isothermal Lane Emden Equation in a Spherical Geometry", Revista Mexicana de Astronomía y Astrofísica, 51, 173–180 (2015).

78. A.A. Al-Rabiah, A.M. Ajbar, M.A. Soliman, F.A. Almalki and O.Y. Abdelaziz (2015): "Modeling of nitrogen separation from natural gas through nanoporous carbon membranes", Journal of Natural Gas Science and Engineering, 26, 1278–1284 (2015).

79. A.A. Ibrahim, A.S. Al‐Fatesh, W.U. Khan, M.A. Soliman, R.L. AL Otaibi and A.H. Fakeeha (2015): "Influence of Support Type and Metal Loading in Methane Decomposition over Iron Catalyst for Hydrogen Production", Journal of the Chinese Chemical Society, 62 (7), 592-599 (2015).

80. Attia M. Attia and Hussain Musa (2015): “Effect of Sodium Magnesium Silicate Nano Particles on Rheology of Xanthan Gum Polymer“ International Journal of Scientific and Engineering Research , IJSER Volume 6, Issue 4, April 2015 Edition.

81. Habibu Shuaibu and Attia M. Attia (2015): “How to Prepare Input File of Reservoir Simulation by Using Reservoir Characterization“ International Journal of Scientific and Engineering Research, IJSER Volume 6, Issue 4, April 2015 Edition.

82. Attia M. Attia and Habibu Shuaibu (2015): “Identification of Barriers and Productive Zones Using Reservoir Characterization” International Advanced Research Journal In Science, Engineering and Technology IARJSET, Volume 2, Issue 12, December 2015.

83. Attia M. Attia and Hussain Musa (2015): “Rheological Properties Study of Water Polymer Solution with Nanoparticles” International Advanced Research Journal In Science, Engineering and Technology IARJSET, Volume 2, Issue 12, December 2015.

84. Mamdouh A. Gadalla (2015): “A new graphical method for Pinch Analysis applications: Heat exchanger network retrofit and energy integration”, Energy, Volume 81, 2015, Pages 159-174

85. Mamdouh A. Gadalla (2015): “A new graphical-based approach for mass integration and exchange network design”, Chemical Engineering Science, Volume 127, 2015, Pages 239-252

86. Mamdouh A. Gadalla (2015): “A novel graphical technique for Pinch Analysis applications: Energy Targets and grassroots design”, Energy Conversion and Management, Volume 96, 2015, Pages 499-510

87. Omar Y. Abdelaziz, Mamdouh A. Gadalla, Mahmoud M. El-Halwagi, Fatma H. Ashour (2015): “A hierarchical approach for the design improvements of an Organocat biorefinery”, Bioresource Technology, Volume 181, 2015, Pages 321-329

88. Mamdouh A. Gadalla, Omar Y. Abdelaziz, , Dina A. Kamel, Fatma H. Ashour (2015): “A rigorous simulation-based procedure for retrofitting an existing Egyptian refinery distillation unit”, Energy, Volume 83, 2015, Pages 756-765

89. Dalia Amer, Mamdouh Gadalla, Fatma Ashour (2015): “Gasification of Coal and Heat Integration Modification for IGCC - Integrated Gasification Combined Cycle”, CHEMICAL ENGINEERING TRANSACTIONS, 45, 1825-1830 (2015)

90. Mamdouh A. Gadalla (2015): “A New Graphical Method for Pinch Analysis and Energy Integration”, CHEMICAL ENGINEERING TRANSACTIONS, 34, 1291-1296 (2015).

91. Ibrahim Mohamed, Mohamed Gadala, Mohamed Alqaradawi, and Osama Badr (2015): “Centrifugal Compressor Spiral Dry Gas Seal Simulation Working at Reverse Rotation”, ASME J. Procedia Engineering (PROENG13131) ISSN: 1877-7058, Imprint: ELSEVIER, 2014, USA. (Template, please use same format).

92. Khodeir Laila (2015): "Assessing Discrepancies in Current Practices for Selecting Heating, Ventilating and Air-conditioning Systems in Buildings", JES Journal of Engineering Sciences-Faculty of Engineering- Assiut University, V.43,No.1,pp.140-155,

93. Khodeir Laila (2015): " Forming A Constructivism Design Studio: Simulation Of Real-Life Architecture Experience On An Experimental Youth Workshop In Egypt", JES Journal of Engineering Sciences-Faculty of Engineering- Assiut University, V.43,No.1,pp.125-139

94. Khodeir Laila (2015): "Teaching with Influence: An Analysis of Teaching Methods Used at the Course of Control Systems in Buildings”, JES Journal of Engineering Sciences-Faculty of Engineering- Assiut University, V.43,No.2.

95. Khodeir Laila, (2015): "Suggested Guidelines for Integrating Maintenance Considerations into the Life Cycle of the Building" , Journal of Engineering Sciences-Faculty of Engineering- JoC ( Journal of Construction), Official Journal of the Association of Schools of Construction of Southern Africa, April

96. Khodeir Laila, (2015): "Construction Project Management: Analysis of the Root Causes of Change in Low-Income Housing Projects in Egypt”, Journal of Architecture and Planning (JAP) King Saud University,Vol.25,No.1.

97. Hassan, D., Abdulrahman, A., and Rashed, A. (2015). "The Role of Cairo's Hybrid Cultural Spaces in Creating Sense of Place Attachmnet". Spaces and Flows: An International Journal of Urban and ExtraUrban Studies , Vol 6, Issue 2, PP 1-19.

98. Ali Afzali-ardakani, Shu-jen Han, Amal Kasry, Ahmed Maarouf, Glenn J Martyna, Razvan Nistor, Hsinyu Tsai (2015): “Graphene Nanomesh Based Charge Sensor”, US Patent 20,150,233,900, 2015.

99. Mostafa Mohammed Mohie El-Din, Mohammed Sayed Kotb, Walid Sayed Emam (2015): “Prediction intervals for future order statistics from two independent sequences”, AJTAS, 4 (2015) 33 - 40.

100. Mostafa Mohammed Mohie El-Din, Mohammed Sayed Kotb, Walid Sayed Emam (2015): “Prediction intervals for progressive Type-II right-censored order statistics”, AJTAS, 4 (2015) 329 - 338.

101. S. U. El-Kameesy, E. Salama, S. Elfiki1, O. Nasser, M. Ehab (2015): “Indoor Radon Monitoring and Gamma Activity Levels Inside Some Ancient Egyptian Tombs in Luxor”. International Journal of Advanced Research (2015), Volume 3, Issue 6, 1007-1016.

102. E. Salama, S. U. El-Kameesy, S.A. El-Fiki, N. El-Faramawy and Areej Hazawi (2015): “Natural Radioactivity in different water samples inAl-Bayda Region Northeast of Libya”. International Journal of Advanced Research (2015), Volume 3, Issue 3, 48-54.

103. Ahmad Rateb and S. K. S. Yusof (2015): “Recovery error bounds on compressed sensing of noisy signals,” International Journal of Communication Systems”, John Wiley & Syst., vol. 28, no. 3, pp. 546–559, Feb. 2015. (Impact factor = 1.106 in 2013).

104. Duong, V.-H., Bastawrous, H.A., Lim, K., See, K.W., Zhang, P., Dou, S.X. (2015): “Online state of charge and model parameters estimation of the LiFePO4 battery in electric vehicles using multiple adaptive forgetting factors recursive least-squares,” Journal of Power Sources, vol. 296, pp. 215-224, Available online 24 July 2015. (Impact Factor (IF) = 6.22 in 2014/2015 © Thomson Reuters Journal Citation Reports 2015). Online Available from: http://www.sciencedirect.com/science/article/pii/S0378775315300884

105. Mariam Wagih Attia, F.E.Z Abou-Chadi, Hosam El-din Mostafa, and Nagham (2015): “Classification of Ultrasound Kidney Images Using PCA and Neural Networks”, (IJACSA) International Journal of Advanced Computer Science and Applications Vol. 6, No. 4, April 2015.

106. G. S. A. Fam, Y. F. Rashed, J. T. Katsikadelis (2015): “The Analog Equation integral formulation for plane Piezoelectric media”, Engineering analysis with boundary elements, 2015, 51, 199-212, DOI:10.1016/j.enganabound.2014.10.013.

107. G. S. A. Fam, Y. F. Rashed (2015): “An efficient meshless technique for the solution of transversely isotropic two-dimensional piezoelectricity”, Computers & Mathematics with Applications 02/2015; 69(5). DOI:10.1016/j.camwa.2015.01.007

108. Mostafa Mohammed Mohie El-Din, Mohammed Sayed Kotb, Walid Sayed Emam, (2015): “Bayesian estimation of the parameters of the the modified Weibull lifetime model based on combined hybrid censored data”, IJSCE, 4 (2014) 92 - 97.

109. Sayed Y. Akl, Ahmed A. Abdel-Rehim, hamed Mosleh (2015): “Monitoring of a single cylinder engine running on gasoline and gasoline-Ethanol blend using wear particle analysis as an Engine condition monitoring technique”. IAC International Conference on Industry Academia Collaboration, 3-5 March, 2014, Cairo, Egypt

110. Iman S. El-Mahallawi, Nadia H Rafat, Nagwa Khattab, Moetaz A. Nabil, Ahmed A. Abdel-Rehim, Sayed Akl, and Amr Mohsen (2015): “Economic Technical Solutions for Enhancing the Efficiency of Thermal Solar Systems”, IAC International Conference on Industry Academia Collaboration, 3-5 March, 2014, Cairo, Egypt.

111. Sayed Akl (2015): “Investigation of wear particle of natural and artificial joints using Ferrography Technique”, ASME 2014 3rd Global Congress on Nano engineering for Medicine and Biology, Paper No. NEMB2014-93093, 2-5 Feb. 2014

112. Hany A. Elazab, S. Moussa, B. Frank Gupton, M. S. El-Shall (2015): “Microwave-assisted synthesis of Pd nanoparticles supported on Fe3O4, Co3O4, and Ni(OH)2 nanoplates and catalysis applicationfor CO oxidation”. Journal of Nanoparticle Research, June 2014, 16:2477.

113. Ibrahim Mohamed, Mohamed Gadala, Mohamed Alqaradawi, and Osama Badr, (2015): “Centrifugal Compressor Spiral Dry Gas Seal Simulation Working at Reverse Rotation”, ASME J. Procedia Engineering (PROENG13131) ISSN: 1877-7058, Imprint: ELSEVIER, 2014, USA

114. ElDomiaty, T., Soliman, A. & Anis, M. (2016) “The Financial Aspects of Corporate Responsibility Index in Egypt: A Quantitative Approach to Institutional Economics”, International Journal of Social Economics, Vol. 43 Issue 3, pp.284 – 307

115. Sheweka, S.& Magdy, N., (2014): "The Impact of Different Green Roofs Strategies on the Indoor Thermal Comfort with special reference to Cairo-Egypt”, Advanced Materials Research Vol. 935 (2014) pp 38-43 © (2014) Trans Tech Publications, Switzerland

116. Taher G. Abu-El-Yazied, Osama A. Montasser, F. S. Al-Fares, (2014): “Identification of Vibrating Structures under stochastic loading conditions”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684, p-ISSN: 2320-334X, Volume 11, Issue 5 Ver. IV, PP 21-28, (Sep- Oct. 2014).

117. Osama. A. Montasser and B. A. El-Sayed, (2014): “Design of an Adaptive Neural Network Controller for Effective Position Control of Linear Pneumatic Actuators”, International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161, Vol.4, No.4, pp 3498-3507, (Oct 2014).

118. Osama. A. Montasser and M. E. G. Samra, (2014): “A smart PC based system to control the air-fuel ratios in SI engines foe best performance”, International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161, Vol.5, No.4, pp 3508-3918, Oct 2014.

119. Taher G. Abu-El-Yazied , Ahmad M. Ali, Osama A. Montasser, (2014): “Optimization of Wind Duct Geometry for Maximizing Power Generation of Ducted Vertical Turbines”, IOSR Journal of Engineering (IOSRJEN), ISSN (e): 2250-3021, ISSN (p): 2278-8719, Vol. 4, Issue 10, V1, pp 11-19, Oct. 2014.

120. Osama A. Montasser, (2014): “An Improved Accurate Trajectory Control System for Industrial Hydraulic Robotic Arms”, International Journal of Modern Engineering Research (IJMER), ISSN: 2249–6645, Vol. 4, Issue 10, pp 18-31, Oct. 2014.

121. Gamal G. L. Nashed (2014): “Exact axially symmetric solution in f(T) gravity theory” Adv. High Energy Phys.” Volume 2014, Article ID 857936.

122. E. Salama (2014): “Egyptian limestone for gamma dosimetry: An EPR Study” Radiation Effects and Defects in Solids” Volume 169, Number 4, 3 April 2014, pp. 325-333.

123. E. Salama, H. M. Diab, S. A. EL-Fiki, A. Ibrahim (2014): “Soil samples analysis of Western Coast - Gulf of Suez, Egypt for the sequential determination of natural and anthropogenic radionuclides” Arab J. Nucl. Sci. Applic., 2014.

124. Wafa I Abdel-Fattah, Abdel Sattar M. Sallam, Nagwa Attawa, E. Salama, Ahmed M Maghraby and Ghareib W Ali, (2014): "Functionality, antibacterial efficiency and biocompatibility of nanosilver/chitosan/silk/phosphate scaffolds 1. Synthesis and optimization of nanosilver/chitosan matrices through gamma rays irradiation and their antibacterial activity" (2014), Mater. Res. Express 1 035024 doi:10.1088/2053-1591/1/3/035024

125. Taher A. Salah, Ahmad M. Mohammad, Mohamed A. Hassan, Bahgat E. El-Anadouli (2014): "Development of nano-hydroxyapatite/chitosan composite for cadmium ions removal in wastewater treatment", Journal of the Taiwan Institute of Chemical Engineers, Vol. 45 Issue 4 pp. 1571-1577, 2014.

126. Gumaa A. El-Nagar, Ahmad M. Mohammad, Mohamed S. El-Deab, Bahgat E. El-Anadouli, (2014): “Electro-oxidation of Formic Acid at Binary Platinum and Gold Nanoparticle-Modified Electrodes: Effect of Chloride Ions” Int. J. Electrochem. Sci. Vol. 9, pp. 4523–4534, 2014.

127 Gamal G. L. Nashed (2014): “Schwarzschild-NUT solution in modified teleparallel gravity theory” Astrophys & scpace science Volume 350, Issue 2”, pp 791.

128. Gumaa A. El-Nagar, Ahmad M. Mohammad, Mohamed, S. El-Deab, Takeo Ohsaka, Bahgat E. El-Anadouli (2014): “Acrylonitrile-contamination induced enhancement of formic acid electrooxidation at platinum nanoparticles modified glassy carbon electrodes” J. Power Sources, Vol. 265, 1 November 2014, Pages 57–61, 2014.

129. Ghada H. El-Nowihy, Ahmad M. Mohammad, Mostafa M.H. Khalil, Mohamed S. El-Deab (2014): "Development of Nickel Oxide and Manganese Oxide Nanostructured Binary Modified Anodes for Methanol Electro-Oxidation”, Int. J. Electrochem. Sci. Vol. 9, pp. 51775186, 2014.

130. Gumaa A. El-Nagar, Ahmad M. Mohammad (2014): “Enhanced electrocatalytic activity and stability of platinum, gold, and nickel oxide nanoparticles-based ternary catalyst for formic acid electro-oxidation”, Int. J. Hydrogen Energy, Vol. 39, pp. 11955 11962, 2014.

131. A. Ajbar, A Alhumaizi, and M. A. Soliman and E. Ali, (2014): "Model-based energy analysis of an integrated MIDREX based iron/steel plant”, Chemical Engineering Communications, 201, No. 12,1686-1704, 2014.

132. A.Abdel Gawad,M.A. Elshahir Sadek, H.E.Mostafa. (2014), "Stability of Double Base Propellants, a Comparison Between Classical Stability Tests and modern Analytical Techniques", Proceedings of the 7th International Conference on Chemical & Environmental Engineering, MTC, Cairo, EGYPT, May 27-29,2014.

133. Hamad, S.S. and Othman, A.A.E. (2014). "A Study of the Causes of Inefficient Use of Open Public Green Spaces: A Literature Review" Proceedings of the 10th International Conference on Civil And Architecture Engineering (ICCAE-1), May 27-29, 2014, Cairo, Egypt. Online Available from: https://www.researchgate.net/profile/Ayman_Othman

134. El-Sokhn, N.H. and Othman, A.A.E. (2014). "Project Failure Factors and their Impacts on the Construction Industry: A Literature Review" Proceedings of the 10th International Conference on Civil And Architecture Engineering (ICCAE-1), May 27-29, 2014, Cairo, Egypt. Online Available from: https://www.researchgate.net/profile/Ayman_Othman

135. F. Sorour, M. Gadalla, I. Abdo, S. Rageb, N. Abdelmoniem, F. Ashour. (2014): “Multifactor overall performance measurements model as effectual performance measures in petroleum industry”, Journal of international academic research for multidisciplinary, Vol., No. 2, Pages 702-716

136. Neven El-Gamal, F. E. Z. Abou-Chadi, and H. Moustafa, (2014): “A New Technique for Adding Scribbles in Video Matting”, IJCSI International Journal of Computer Science Issues, Vol. 11, Issue 1, No 2, pp. 116-122, January 2014

137. M. Mowafy, Marwa Obayya and F.E.Z. Abou-Chadi, (2014): “Automatic Classification of Sleep Stages Using EEG Records”, Mansoura Eng. Journal (MEJ), vol.39, no.1, March. 2014.

138. Deifalla, A., Khali M. S., Abdelrahman, A. (2014): “Simplified Model for the Torsional Strength of Concrete Beams with GFRP Stirrups”, Composites for construction, ASCE, online since July 2014.

139. Deifalla, A. and Ghobarah, A. (2014). “Behavior and Analysis of Inverted T-shaped RC Beams under Shear and Torsion”, Engineering Structures, Elsevier, 62, pp. 776-786.

140. Deifalla, A., Hamed, M., Saleh, A., and Ali, T. (2014). “Exploring GFRP bars as reinforcement for rectangular and L-shaped beams subjected to significant torsion: An experimental study.” Engineering Structures, Elsevier, 59, pp. 776-786.

141. Ahmed, H.M.A. and Othman, A.A.E. (2014), "Achieving Sustainable Values Through Waste Reduction During the Architectural Design Process: A literature review" International Conference on Industry Academia Collaboration, 3-5 March 2014, Cairo, Egypt. Online Available from: https://www.researchgate.net/profile/Ayman_Othman.

142. Epead, A.A.H. and Othman, A.A.E. (2014). "Marketing Strategies For Promoting The Architectural Engineering Profession In A Rapidly Changing Business Environment: A Literature Review" International Conference on Industry Academia Collaboration, 3-5 March 2014, Cairo, Egypt. Online Available from: https://www.researchgate.net/profile/Ayman_Othman.

143. Shouman, B.A. and Othman, A.A.E. (2014), "Total Quality Management As A Strategic Option for Achieving Competitive Advantage in Architectural Design Firms: A Literature Review" International Conference on Industry Academia Collaboration, 3-5 March 2014, Cairo, Egypt. Online Available from: https://www.researchgate.net/profile/Ayman_Othman

144. Ibrahim Medany, Mostafa Shazly, Mahmoud G. El-Sherbiny, “Expert-Based-Computer Aided Design and Component Selection for Dust Collection Systems”, International Journal of Scientific Research in Environmental Sciences, 2(1), pp. 14-28, 2014.

145. Halim, A.S.A. and Othman, A.A.E. (2014)," Managing Stakeholders’ Needs and Expectations In The Architectural Design Process: A Knowledge Management Approach" In: Laryea, S. and Ibem, E. (Eds) Proceedings 8th Construction Industry Development Board (CIDB) Postgraduate Conference, 10-11 February 2014, University of the Witwatersrand, Johannesburg, South Africa, pp. 405-421.

146. Ahmed A.A. Attia, Ahmed A. Abdel-Rehim, (2014): “Thermal analysis for system uses pressurized hot water for seawater desalination (pressurized multistage)”, Desalination 346 (2014) 91–99.

147. A. Ramadan , M.H. Mohamed, S.Y. Marzok , O.A. Montasser , A. El Feky , A.R. El
Baz, (2014): “An artificial generation of a few specific wave conditions: New simulator design and experimental performance”, Energy (2014).

148. Badr and El-Farouk, (2014): “Formation of Dangerous Zones Due to Accidental Release of Liquefied Natural Gas in Egypt”, Int. J. Environmental Science and Development, V. 5, No. 1, 2014, Singapore.

149. Hassan, Dalya M. Hassan, Abdulrahman Alaa, and Ahmed Rashed (2014): “Role of Cairo’s Hybrid Cultural Spaces in Creating Sense of Place”, Spaces and Flows: An International Journal of Urban and Extra Urban Studies, ISSN: 2154-8676 (Print) ISSN: 2154-8684 (Online).

150. M. R. Ismail, (2014): "Soniferous Architecture from Archaeo-acoustics towards the Soundsculpture Aural era" In press. International Journal of Art, Culture and Design Technologies, 4(1), 44-64, January-June 2014.

151. ElAttar, M., AlAzab, M. & AlAntary, A. (2014) "Different methodologies in sustainable urban education" Mansoura Engineering Journal (MEJ) Faculty of Engineering- Mansoura University, June 2014.

152. Sheweka, S. (2014) "The Impact of Different Green Roofs Strategies on the Indoor Thermal Comfort with special reference to Cairo-Egypt”, Advanced Materials Research Vol. 935 (2014) pp 38-43 © (2014) Trans Tech Publications, Switzerland.

153. M. R. Ismail. (2014): “Sound Preferences of the Dense Urban Environment: The Soundscape of Cairo" Journal of Frontiers of Architectural Research, Elsevier (2014) 3, 55–68.

154. Othman, A.A.E. (2014). “A Study of the Competency Requirements of Property Development Graduates to Meet the Qualifications of the South African Construction Industry”. Journal of Engineering, Design and Technology, Vol. 12, No. 1, pp. 2-28.

155. Khodeir Laila, Elmoatasem Samar, Abdelkader Morad, (2014): "Comparative Analysis between In-House And Outsourced Services Through The Phase Of Building Maintenance In Egypt". Mattaria Engineering Research Journal.

156. Elmaboud Y. Abd, Mekheimer Kh. S., Abdelsalam S. I. (2014). “A Study of Nonlinear Variable Viscosity in Finite-Length Tube with Peristalsis”. Applied Bionics and Biomechanics DOI 10.3233/ABB-140101.

157. Mostafa Mohammed Mohie El-Din, Mohammed Sayed Kotb, Walid Sayed Emam, (2014): “Bayesian estimation of the parameters of the the modified Weibull lifetime model based on combined hybrid censored data”, IJSCE, 4 (2014) 92 - 97.

158. E. Salama, H. M. Diab, S. A. EL-Fiki, A. Ibrahim (2014): “Soil samples analysis of Western Coast - Gulf of Suez, Egypt for the sequential determination of natural and anthropogenic radionuclides” Arab J. Nucl. Sci. Applic. (2014).

159. AbdelSalam, S. S., Baligh, F. A., and El-Naggar, H. M. (2014): “A Database to Ensure Reliability of Bored Pile Design in Egypt”. Proceedings of the ICE: Journal of Geotechnical Engineering, Vol. 168, No. 2, pp. 131–143.

160. AbdelSalam, S. S., Suleiman, M. T, and Sritharan, S. (2014). “Modeling Load-Transfer Behavior of H-Piles using Direct Shear and Penetration Test Results”. ASTM, Geotechnical Testing Journal, Vol. 37, No. 4, pp. 1–15.



Accepted Papers

1. Soliman H.A., Salama E., Youssef G.M., Sara Hamad, (20117) “Evaluation of the thermoluminescence kinetic parameters of zinc-borosilicate glass after gamma-irradiation”, International Journal of Applied Glass Science (Acceepted 25 July 2017).

2. Mohie El-Din, M. & Emam, W. “Prediction intervals for ordinary and dual generalized order statistics from two independent sequences”, communications in statistics, simulations and computations, 03 Aug 2017, DOI: 10.1080/03610918.2017.1359284. (online)

3. Mohammad, A.M, Al-Akraa, I.M., El-Deab M.S., El-Anadouli B.E. (2017) “Superior electrocatalysis of formic acid electro-oxidation on platinum, gold, and manganese oxide nanoparticle-based ternary catalyst”, International Journal of Hydrogen Energy, under publication process.

4. Soliman M.A. (2017) “Approximate analytical solution for mathematical models of thermal ignition and non-isothermal catalytic zero order reaction in a spherical geometry”, Journal of King Saud University – Engineering Sciences, in Press

5. Sulaiman I. Al-Mayman, Abdulrahman S. Al-Awadi, Yousef S. Al-Zeghayer, Moustafa A. Soliman (2018),Partial Oxidation of Ethane to Acetic Acid using a Metallic Pd Promoted MoVNb Catalyst Supported on Titania, Journal of the Chemical Society of Pakistan. 40, #1

6. Walaa H. Mahmoud , Gehad G. Mohamed , Hoda A. Elsawy (2017) ‘Novel Schiff base derived from the condensation of 2-quinoline carboxaldehyde and ambroxol drug with some of transition metal ions” Applied Organomettalic Chemistry.

7. Abdulrahman A. Al-Rabiah , Abdelhamid M. Ajbar , Moustafa A. Soliman , Omar Y. Abdelaziz “Performance of Nanoporous Carbon Membrane for Hydrogen Recovery”, Journal of the Chemical Society of Pakistan, 40, #2.

8. Moustafa Elshafei and Ashraf Seleym, "Potential of Solar-driven CDI Technology for Water Desalination in Egypt" Renewable Energy and Sustainable Development Journal (2017), accepted to be published.

9. Khodeir Laila, (2015) "An Evaluation of Current Practices of Facility Management in Egypt- Status, Importance and Impact" , Journal of Engineering Sciences - Faculty of Engineering- Shoubra University, April

10. Adham Naji and Paul Warr, (2016): “Proof of Perturbational Duality between Classical Cavities and Planar Resonators with Magnetic Side-walls”, IEEE Microwave and Wireless Component Letters, accepted.

11. Othman, A.A.E. (2014) "An International Index for Achieving Customer Satisfaction in the Construction Industry", International Journal of Construction Management, Vol. 13, No.3, pp.

12. Othman, A.A.E. (2014) "Drivers for Achieving Customer Satisfaction in the Construction Industry: An International Perspective", Journal of Engineering Construction and Project Management, Vol. 4, No. 4, pp.

13. Osama A. Montasser, “Development of a Smart Mechatronic Tracking System to Enhance Solar Cell Panels Performance”, International Journal of Modern Engineering Research (IJMER), ISSN: 2249–6645, Accepted to be published in Nov. 10th, 2014.

14. M. A. Soliman, Y. Al-Zeghayer, A. Ajbar, “A modified orthogonal collocation method for reaction diffusion problems”, Brazilian Journal of Chemical Engineering, In Press

15. Radwan, M., Gendy, M., Hadhoud, M., "Effect of Nano-Sized Barium Ferrite Catalyst on Ballistic Properties of Composite", 7th International Conference on Chemical & Environmental Engineering, MTC, Cairo, Egypt, 27-29 May, 2014.

16. Gamal G. L. Nashed (2014) “Relocalization of total conserved charge for Schwarzschild-AdS spacetime” “will appear in Int. J. Theor. Phys’’.

17. Gamal G. L. Nashed (2014) “Charged axially-symmetric solution in f(T) gravity theory” Will appear in Indian Journal of Physics”

18. Y. H. Elbashar, A. El-Korashy, M. M. Elokr, “Study of the elastic properties and microhardness of Neodymium doped borate glasses using an ultrasonic technique”, Egyptian Journal of Solids (2013)

19. Othman, A.A.E. (2014). "An International Index for Customer Satisfaction In The Construction Industry" International Journal of Construction Management, in press.

20. Aly Ahmed, Abdel-Rahim, and Rashed, “Involving Younger Generations in Defining Future Transportation Needs in Developing Countries: A Case Study of Egypt’s National Transportation Network to Support Sustainable Developments”, Submitted for Publication in 2015 Transportation Research Record and Presentation at the 94th Annual Meeting of the Transportation Research Board, Washington D.C., January 11-15, 2015.

21. Kenawy, I. (2014) "Sustainability of Cultural Diversity: An Egyptian Perception", to be presented in ARCHCAIRO6: Responsive Urbanism in Informal Areas, Towards a Regional Agenda for Habitat III. Cairo, Egypt.

22. Kenawy, I. & Rushdy, R. (2014) "Buildings clusters and outdoor thermal comfort in hot arid regions", to be presented in ARCHCAIRO6: Responsive Urbanism in Informal Areas, Towards a Regional Agenda for Habitat III. Cairo, Egypt.

23. Mamdouh A. Gadalla, “A New Graphical Method for Pinch Analysis Applications: Energy Integration”, Journal of Energy, 2014, in press.

24. Mamdouh A. Gadalla, Omar Y. Abdelaziz, Dina A. Kamel, Fatma H. Ashour, "Building a rigorous simulation model of an existing crude oil distillation unit of an Egyptian refinery for revamping applications", Journal of Applied Thermal Engineering, 2014, in press.

25. Khodeir Laila, Hamdy Ahmed, (2014), "Identifying the Latest Risk Probabilities Affecting Construction Projects in Egypt According to Political and Economic Variables- From January 2011 to January 2013", Elsevier- HBRC Journal                                 

Submitted Papers


Submitted 2017

1. Othman, A. A. E. and Elsaay, H. A. I. (2017). Adaptive Reuse: An Innovative Approach For Generating Sustainable Values For Historic Buildings In Developing Countries. International Journal of Architectural Research, Forthcoming.

2. Khalil, M.H.M, Elsaay, H. A. I. and Othman, A. A. E. (2017). Talent Management as A Novel Approach For Developing Innovative Solutions For Egyptian Heritage Communities Development: A Literature Review. International Journal of Architectural Research, Forthcoming.

3. Othman, Ayman, Elsaay, Heba. (2017) “a learning-based framework adopting post occupancy evaluation for improving the performance of architectural design firms”, Journal of Engineering, Design and Technology, Forthcoming.

4. Salama E., Soliman H.A. (2017) “Thermoluminescence Glow Curve Deconvolution and Trapping Parameters Determination of Dysprosium Doped Magnesium Borate Glass”. Radiation Physics and Chemistry.

5. Salama E., Ehab M.& Rühm W. (2017) “Radon and Thoron Concentrations Inside Ancient-Egyptian Tombs at Saqqara Region: Time-resolved and Seasonal Variation Measurements”, Nuclear Engineering and technology.

6. Salama E., Soliman H.A. (2017) “Thermoluminscence characteristics and dosimetric parameters of Nd+3 doped alkali borosilicate glass”, International Journal of Applied Glass Science.

7. Salama E., Youssef G.M., Abeer Maher (2017) “Optical and Gamma–rays Shielding Properties of Lithium Borosilicate Glasses Containing Lead”, Optical Material.

8. Salama E., Abeer Maher (2017) “Application of GATE/GEANT 4 Code in Investigation of Gamma Shielding Effectiveness of Glass Materials”, Science and Technology of Nuclear Installations.

9. Salama E., Eissa M. M., Tageldin A. S. (2017) “Development of Advanced Tungsten Austenitic Stainless Alloy as A Potential Nuclear Material”, Annalus of nuclear Energy.

10. Abd Elmaboud, Y., Abdelsalam, S.I., Mekheimer, Kh.S., Vafai, K. (2017) ‘Variable viscosity and thermal conductivity for immiscible fluids with heat transfer’. Heat and Mass Transfer. Ms. Ref. No. HAMT-D-16-00816.

11. Abdelsalam, S.I., Bhatti, M.M. (2017) ‘The study of non-Newtonian nanofluid with Hall and ion slip effects on peristaltically induced motion in a non-uniform channel’. Journal of Molecular Liquids. Ms. Ref. No. MOLLIQ_2017_1222.

12. Mohie El-Din, M. & Emam, W. “Outer and inner prediction intervals for generalized order statistics and its dual”.

13. Asal, Y.M., Al-Akraa, I.M., Mohammad A.M, El-Deab M.S. (2017) “A competent “simultaneously co-electrodeposited” Pt-MnOx anodic nanocatalyst for direct formic acid fuel cells”, Journal of Power sources, under review.

Submitted 2016

1. Mahmoud Walaa, Madboli Said, Ibrahim Diaa, Khodeir Laila,(2016),"Risk Management: the impact of risk management on the management of construction projects", Scientific Journal of Faculty of commerce, Assiout University, V. 59.

2. Attia Sherif, Ibrahim Diaa, Khodeir Laila,(2016)," Effective Usage of Quality Management Tools in Workshop Phase of Value Engineering Studies", Engineering Research Journal, Shoubra University, Cairo, Egypt.

3. Mahmoud Walaa, Madboli Said, Ibrahim Diaa, Khodeir Laila,(2016),"Risk Management: the status of application of risk management in Mega Hotel building projects in Egypt", Scientific Journal of Faculty of commerce, Assiout University, V. 59.

4. Elabd Nouran, Sadek Samir, Khodeir Laila, Abdelkader Sherif, (2016), " Examining Building Infromation Modelling Implementation, Comparative analysis between western countries and the middle eastern companies", Engineering Research Journal, Shoubra University, Cairo, Egypt.

5. Magdy Mariam, Abdelkader Mourad, Khodeir Laila, (2016), "Evaluating the efficiency of the application of time schedules in Public Hospital Facilities in Egypt", Engineering Research Journal, Shoubra University, Cairo, Egypt.

6. Hisham Gaser, Farouk Akram, Khodeir Laila, (2016), "management of the integrated relationship among the design process and the marketing phase in luxurious real estate housing", Engineering Research Journal, Shoubra University, Cairo, Egypt.

7. AbdelSalam, S. S., and Azzam, S. A. (2016a). “Reduction of lateral pressures on retaining walls using geofoam inclusion”. Geosynthetics International, journal published online 4th of April, 2016 (doi: 10.1680/jgein.16.00005).

8. Adham Naji and Mina H. Soliman (2016) “Center Frequency Stabilization in Planar Dual-Mode Resonators during Mode-Splitting Control”, Nature Scientific Reports.

9. Elfekey H.M., Bastawrous H.A., and Okamoto S.," A Touch Sensing Technique Using the Human Body Extremely Low Frequency Fields," under review in Sensors Journal.

10. Amr A. Abdel Fatah, A. Abdelmawla” A Combined Feedback Feed Forward Control Scheme for Pitch Regulated Vertical Axis Wind Turbine“Asian Journal of Control

11. I. El-Mahallawi , M.M.Z. Ahmed, , A.A.Mahdy, A.M.M. Abdelmotagaly, W. Hoziefa , M. Refat, “Effect of Heat Treatment on Friction-stir-processed Nanodispersed AA7075 and 2024 Al Alloys”, TMS 2017.

12. Abdelrahman Abbas, Andrew Seif, Iman El Mahallaw2, Waleed Khalifa “Microstructure and Hardness of Subzero Quenched and Heat Treated Ti-6Al-4V Alloy”, TMS 2017.

13. Aya Assem, Shimaa El-Haddad, Iman El Mahallawi “Centrifugal Casting of Al-Si Scrap”, TMS, 2017.

14. Hussein Badr, Mostafa Amr Youssef, Hebatullah Sayed Abd Elsalam, Mirna Abde Elrahman Mohamed, Mohamed Gamal El-Kholy, Iman El-Mahalalwi, Ahmed Abdel-Rehim “Thermoelectric Behaviour of Polyvinyl Acetate/ CNT Composites”, TMS, 2017.

15. Esraa Mousa and Attia M. Attia “Optimum Polymer Concentration in EOR” International Advanced Research Journal In Science, Engineering and Technology IARJSET, Volume 3, Issue 10, October 2016

16. Z. Khalifa, K. Hassan, M. Abdel-Azzem. (2016) “Biofuel Cells Based on Glucose Electrooxidation at Conducting Polymer Modified Electrodes with Palladium and Platinum Nanoparticles, Submitted to Int. J. Electrochem. Sci., (September 2016).

17. Salama E., Soliman H.A., Youssef G.M., Sara Hamad, “Thermoluminescence Properties of Synthetic Borosilicate Glass Doped with ZnO” Journal of Luminescence.

18. Eissa M. M., Salama E., El-kameesy S. U., Tageldin A. S., “Development of Advanced Tungsten Austenitic Stainless Alloy for Nuclear Reactor Applications”

19. Esraa Osama and Attia M. Attia “New Approach for Selecting the Optimum Polymer Concentration in EOR” submitted to BUEACE 2016.

20. Ebrahim hassan and Attia M. Attia “Modified Viscoelastic Surfactant as a Novel Trend in Enhanced Oil Recovery” submitted to BUEACE 2016.

21. Ahmed A. Maarouf, Amal Kasry, Bhupesh Chandra, and Glenn J. Martyna, “A Graphene-Carbon Nanotube Hybrid Material for Photovoltaic Applications“, CARBON.

22. Mostafa Mohammed Mohie El-Din, Mohammed Sayed Kotb, Walid Sayed Emam, “Prediction of generalized order statistics based on ordinary order statistics”.

23. R. Aly, S. Aly, E. El-khateeb, T. Elkafrawy, A. Lotfy, A. Mohamed, A. Radi, E. Salama, A. Sayed, “Search for neutral MSSM Higgs bosons decaying to µ +µ- in pp collisions at √s=7 and 8 TeV”, Submitted to Physics Letters B.

24. R. Aly, S. Aly, E. El-khateeb, T. Elkafrawy, A. Lotfy, A. Mohamed, A. Radi, E. Salama, A. Sayed, “Search for supersymmetry in events with a photon, a lepton, and missing transverse momentum in pp collisions at √s= 8 TeV”, Submitted to Physics Letters B.

25. M. El Sawy, E. El-khateeb, T. Elkafrawy, A. Mohamed, A. Radi, E. Salama, , “Angular analysis of the decay B0≠K+0 →µ +µ- from pp collisions at √s= 8 TeV”, Submitted to Physics Letters B.

26. M. El Sawy, E. El-khateeb, T. Elkafrawy, A. Mohamed, A. Radi, E. Salama, “Measurement of the CP-violating weak phase φs and the decay width difference ΔΓs using the B0s→J/Ψφ(1020) decay channel in pp collisions at √s= 8 TeV”, Submitted to Physics Letters B.

27. E. El-khateeb, T. Elkafrawy, A. Mohamed, A. Radi, E. Salama, “Limits on the Higgs boson lifetime and width from its decay to four charged leptons”, Submitted to Physical Review D.

28. R. Aly, S. Aly, E. El-khateeb, T. Elkafrawy, A. Lotfy, A. Mohamed, A. Radi, E. Salama, A. Sayed, “Search for a Higgs boson decaying into γγ*→llγ with low dilepton mass in pp collisions in pp collisions at √s= 8 TeV”, Submitted to Physics Letters B.

29. R. Aly, S. Aly, E. El-khateeb, T. Elkafrawy, A. Lotfy, A. Mohamed, A. Radi, E. Salama, A. Sayed, “Search for supersymmetry with photons in pp collisions at √s= 8 TeV”, Submitted to Physical Review D.

30. R. Aly, S. Aly, E. El-khateeb, T. Elkafrawy, A. Lotfy, A. Mohamed, A. Radi, E. Salama, A. Sayed, “Search for neutral MSSM Higgs bosons decaying into a pair of bottom quarks”, Submitted to the Journal of High Energy Physics.

31. A. Ali, R. Aly, S. Aly, S. Elgammal, A. Ellithi Kamel, A. Lotfy, M.A.Mahmoud, A. Radi, E. Salama, “Search for a massive resonance decaying into a Higgs boson and a W or Z boson in hadronic final states in proton-proton collisions at √s= 8 TeV”, Submitted to the Journal of High Energy Physics.

32. S. U. El-Kameesy, E. Salama, S. Elfiki, M. Ehab and W. Rühm, “Radiological safety assessment inside ancient Egyptian tombs in Saqqara”, Submitted to Isotopes in Environmental & Health Studies.

33. E. Salama, A. S. Ali, N. Emad and A. Radi “Therapeutic dose simulation of a 6 MV Varian Linac photon beam using GEANT4”, Submitted to the Journal of Instrumentation.

34. AbdelSalam, S. S., Baligh, F. A., and El-Naggar, H. M. (2015). “Reliability and Construction Control of Vibro Piles”. Submitted to Ain Shams Engineering Journal, July 2015.

35. AbdelSalam, S. S., Azzam, S. A., and Abdel-Awad, A. S. (2015). “Reduced Lateral Pressure on Retaining Walls using EPS Buffer”. Submitted Geosynthetics International Journal, May 2015.

36. A.T. Khalil, F. E. Z Abou-Chadi, “Iris Verification Using Data Fusion,” submitted for publication in the International Journal on Artificial Intelligence Tools. World Scientific Publishing Company

37. Adham Naji, Mina Soliman and Paul Warr, “Center Frequency Stabilization in Planar Dual-Mode Resonators with Mode-Coupling Tuning”, IEEE Transactions on Microwave Theory and Techniques (submitted).

38. N. Aboulfotoh , Y.H.Elbashar , A. El-Korashy, M.M. Elokr , "Copper Doped Phosphate Glasses for Optical Applications", Journal of Non Crystalline Solids (2014)

39. A. O. Abdelhamid, Tamer T. El-Idreesy, N. A. Abdel-Riheem and H. R. M. Rashdan, "Regioselective Synthesis of New Antimicrobial Heterocyclic Compounds: Efficient Solvent-Free Approach under Ambient Conditions", Journal of Heterocyclic Chemistry, submitted.

40. Edward L. Clennan, Will Welch, Tamer T. El-Idreesy and Navamoney Arulsamy, “Regiochemistry and substituent effects on pyrylogen and thiopyrylogen stability and electronic character”, Canadian Journal of Chemistry, submitted.

41. Al-Akraa I. M., Mohammad A. M., El-Deab M. S., El-Anadouli B. E. (2014), “Enhanced Electro-oxidation of formic acid at Pd-nanoparticles modified electrodes: Effect of electrodeposition time”, Arabian Journal of Chemistry. (submitted) – 2014.

42. El-Deab M. S., Mohammad A. M., El-Nagar G. A., El-Anadouli B. E. (2014), “Impurities contributing to catalysis: Enhanced Electro-oxidation of Formic Acid at Pt/GC Electrodes in the Presence of Vinyl Acetate”, Journal of Physical Chemistry C. (submitted) – 2014.

43. E. Salama, S.U. El-Kameesy, A. S. Eldeen, R. Ibrahim."Natural Radioactivity in different types of water in Albayda Region Northeast of Libya"

44. E. Salama, S.U. El-Kameesy, A. Shams Eldeen. “Radioactivity Levels in Some Soil samples from different regions in Al-Fallujah area, Iraq”.

45. E. Salama, S.U. El-Kameesy, M.M. Ghannam, S. Roshdy, M.S. Al-Ayeda.“Effect of Gamma Irradiation on Germination, Growth and Physical Properties of Wheat”.

46. N. Aboulfotoh , Y.H.Elbashar , A. El-Korashy, M.M. Elokr , "Copper Doped Phosphate Glasses for Optical Applications", Journal of Non Crystalline Solids (2014).

47. Mohammed Hussein and Safaa Diab, “Developing visually inspection approaches for geometric characteristics with known tolerances”, Int. J. Collaborative Enterprise

48. ElAttar, M., Khalil, Y. & Abdel Hakim, A. (2014) “A Comparative Study to Reduce the Construction Costs of Buildings- A Case Study: Classrooms Unit of A School” Mansoura
Engineering Journal (MEJ) Faculty of Engineering- Mansoura University, August 2014.

49. Deifalla, A. (2014). “Torsional Behavior of Flanged concrete beams with GFRP Stirrups”, Journal of Structural Engineering, ASCE, in preparation since Mach 2014.

50. Deifalla, A. (2014). “Regression model for the torsion strength of beams strengthened using externally bonded Fiber reinforced polymer.” Engineering Structures, Elsevier, in preparation since June 2014.

51. Mohamed Mohy Elkarmouty and Mohamed Ali Elwageeh “Optimum Pit Limit Heuristic Algorithms- Comparative Study”, 2014, in press.

 

International Conferences


International Conferences (June – November )2017

1. Mohamed H. M. H. Khalil, Heba A. I. Elsaay and Ayman A. E. Othman (2017) " Talent Management as a Novel Approach for Developing Innovative Solutions for Egyptian Heritage Communities Development: A Literature Review " Proceedings of the 1st Virtual Heritage Cairo 1st International Conference: Sustaining Heritage in The Digital Age, Towards Virtual Environments for Middle East’s Cultural Heritage, February 20-02 2017, Cairo, Egypt,

2. Salma H Nassar, Heba A. I. Elsaay and Ayman A. E. Othman (2017) " Challenges and Opportunities of Delivering Green Buildings towards Sustaining the Development of Heritage Communities " Proceedings of the of 1st Virtual Heritage Cairo 1st International Conference: Sustaining Heritage in The Digital Age, Towards Virtual Environments for Middle East’s Cultural Heritage, February 20-02 2017, Cairo, Egypt

3. Ayman A. E. Othman and Heba A. I. Elsaay (2017) " Adaptive Reuse: An Innovative Approach for Generating Sustainable Values for Historic Buildings in Developing Countries " Proceedings of the 1st Virtual Heritage Cairo 1st International Conference: Sustaining Heritage in The Digital Age, Towards Virtual Environments for Middle East’s Cultural Heritage, February 20-02 2017, Cairo, Egypt

4. Sokkar, D.A.A, Heba A. I. Elsaay and Ayman A. E. Othman (2017) "Good-To-Great Concept: A Novel Approach for Addressing the Skills Gap in Architectural Design Firms in Developing Countries" Proceedings of the 11th Built Environment Conference, August 06-08 2017, Durban, South Africa

5. Adel, G., Heba A. I. Elsaay and Ayman A. E. Othman (2017) " Fostering Innovation through Managing Diversity in Architectural Design Firms in Developing Countries" Proceedings of the 11th Built Environment Conference, August 06-08 2017, Durban, South Africa

6. Khalil, M.H.M, Heba A. I. Elsaay and Ayman A. E. Othman (2017) " A Field study investigating the role of Talent Management as a Novel Approach for Developing Innovative Solutions for Egyptian Heritage Communities Development" Proceedings of the 11th Built Environment Conference, August 06-08 2017, Durban, South Africa

7. Nassar, S. H, Heba A. I. Elsaay and Ayman A. E. Othman (2017) " A Field study investigating the development of green buildings in developing countries: A sustainable project management approach " Proceedings of the 11th Built Environment Conference, August 06-08 2017, Durban, South

8. Daoud, A. O., Othman, A., Robinson, H. and Bayyati, A. (2017). Materials Procurement Practical Framework For Minimizing Waste In The Egyptian Construction Industry. International Conference on Sustainability, Green Buildings, Environmental Engineering & Renewable Energy (SGER 2018).

9. Daoud, A. O., Othman, A., Robinson, H. and Bayyati, A. (2017). Materials Procurement Strategies as an Approach to Reduce Materials Waste: A Comparison between the Egyptian Green Pyramid Rating System (GPRS) and the British Building Research Establishment Environmental Assessment Method (BREEAM).

10. L. Micheli, E.F. Fernández, G.P. Smestad, H. Alrashidi, N. Sarmah, I.A.I. Hassan, A. Kasry, G. Nofuentes, N. Sood, B. Pesala, S. Senthilarasu, F. Almonacid, K.S. Reddy, M. Muller, and T.K. Mallick “A unified global investigation on the spectral effects of soiling losses of” PV glass substrates: preliminary resultsin IEEE 44th Photovolt. Spec. Conf. (IEEE, Washington, D.C., 2017).

11. Abdel-Mesih, B.S.A, Osman M, “Wind energy modelling and investigation using statistical methods: A case study of El-Sherouk City in Egypt ". Proceeding of the 7th International Conference & Workshop REMOO-2017. July 2017

12. Sara Helmi, Niveen Mohamed Badra, Mohamed Elkattan. (2017) "Using BP Neural Network for Adapting Playout Time in Communication Networks" Confreence on ‘FUTURE COMPUTING 2017: The Ninth International Conference on Future Computational Technologies and Applications’ February 19-23 2017, Athens, Greece,

13. Abdelatty, M. Badr, M. and Swillam, M. (2017) "Hybrid Plasmonic Electro-Optical Directional Coupler Based Modulator Based on Electrically Tuning the ITO’s Properties" Conference on ‘Frontiers in Optics: The 101th OSA Annual Meeting and Exhibit/Laser Science XXXII’ September 17-21 2017, Washington, District of Columbia, USA

14. M. Badr, Abdelatty, M. and Swillam, M. (2017) "All-Silicon Directional Coupler Electro-Optic Modulator Utilizing Transparent Conducting Oxides" Conference on ‘Frontiers in Optics: The 101th OSA Annual Meeting and Exhibit/Laser Science XXXII’ September 17-21 2017, Washington, District of Columbia, USA

15. Aboelazayem, O., Abdelaziz, O., Gadalla, M., Hulteberg, C., Saha B. (2017) “Biodiesel production from high acid value waste cooking oil using supercritical methanol: Esterification kinetics of free fatty acids”, Proceeding of the 25th European Biomass Conference and Exhibition (EUBCE 2017), p. 1381-1387, June 12-15, Stockholm, Sweden, ISBN: 978-88-89407-17-2.

16. Aboelazayem, O., El-Gendy N.S., Ashour, F.H., Sadek, M.A. (2017) “Complete analysis of castor oil methanolysis for biodiesel production”, Proceeding of the 10th International Conference on Sustainable Energy & Environmental Protection (SEEP2017), p. 43-56, June 27-30, Bled, Slovenia, DOI: 10.18690/978-961-286-048-6.6.

17.Aboelazayem, O., Gadalla, M., Saha B. (2017) “Optimising biodiesel production from high acid value waste cooking oil using supercritical methanol,” Proceeding of the 10th International Conference on Sustainable Energy & Environmental Protection (SEEP2017), p. 57-66, June 27-30, Bled, Slovenia, DOI: 10.18690/978-961-286-048-6.5.

18.Aboelazayem, O., Gadalla, M., Saha B. (2017) “An experimental-based energy integrated process for biodiesel production from waste cooking oil using supercritical methanol”, 20th Conference on process Integration, Modelling and Optemisation for Energy Saving and Pollution Reduction, August 21-25, Tianjin, China.

19. Aboelazayem, O., Gadalla, M., Saha B. (2017) “A comparative study on biodiesel production from waste cooking oils obtained from different sources using supercritical methanol”, Proceeding of the 6th World Congress on Biofuels and Bioenergy, J Bioremediat Biodegrad, 8 (5), p. 56, 2017, September 5-6, London, UK.

20. MennatAllah M. A. Labib, Mohamed Hammam, Mamdouh Gadalla, Fatima Ashour (2017) "Energy and Mass Recovery from Rice Straw as a Biomass Source" Conference on '6th World Congress on Biofuels and Bioenergy' September 5-6, London, UK

21. Aboelazayem, O., Gadalla, M., Saha B. (2017) “One-step production of biodiesel from high acid value waste cooking oil using supercritical methanol”, 10th World Congress of Chemical Engineering (WCCE10) , October 1-5, Barcelona, Spain.

22. Esraa Khaled Ali (2017) "Current Viscosity Measurements of Crude Oils at Different Temperatures and Pressures" Conference on ‘13th Arab International Conference on Polymer Science and Technology’ October 22-26 2017, Sharm EL-Sheikh, Egypt.

23. Reem M. Salah, Ehab F. Abadir, Sahar M.El-marsafy, Mohamed A. Sadek (2017)”Physico-Mechanical Properties of NBR/EPDM Rubber Blend Loaded with different Types of Compatibilizers” Conference on ‘13th Arab International Conference on Polymer Science and Technology’ October 22-26 2017, Sharm EL-Sheikh, Egypt.

24. Waad Mohsen, M. A. Sadek, Hany A. Elazab, (2017)“ Copper Oxide Nanoparticles as a Highly Efficient Catalyst for Catalysis Applications”, "13th International Conference on Polymer Science and Technology [ESPST], 22-26 October 2017, Egypt.

25. Ashraf Seleym and Moustafa Elshafei, “New Energy-Efficient Topology for Solar-Powered Capacitive Deionization Systems,” In the Proceedings of the the IEEE Electrical Power and Energy Conference (EPEC 2017), Oct. 22–25, 2017, Saskatoon, Canada.

26. I. H. Urama, H. Fotouhi and Mohammad . M. Abdellatif, "Optimizing RPL Objective Function for Mobile Low-Power Wireless Networks," 2017 IEEE 41st Annual Computer Software and Applications Conference (COMPSAC), Turin, 2017, pp. 678-683.

27 Mohamed Abdelraheem and Mohammad M. Abdellatif, "Cooperative Anti-Jamming for Secondary Opportunistic Networks: A Colonel Blotto Game Model" 2017 IEEE 13th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob), Rome 2017

International Conferences (2016)

1. Iman El-Mahallawi and Students Group, (2016): “Applying CES to Identify the Hosting Material for Thermoelectric Generator”, 7th North American Materials Education Symposium The University of California, Berkeley, USA March 17-18, 2016.(poster)

2. M.Refat, A. Elashery, Toschi, M.M.Z. Ahmed, A. Morri, I. El-Mahallawi, L.Ceschini; (2016): “Modifying surface mechanical properties of AA7075 by nanodispersion and friction stir processing for enhanced impact resistance”; The European Advanced Materials Congress (EAMC – 2016) Stockholm-Helsinki-Stockholm courtesy of the Viking Line Cruise from 23-25 August 2016.

3. Hussein Osama Badr, Hebatullah Sayed Abd Elsalam, Mirna Abd Elrahman Mohamed, Mostafa Amr Youssef, Mohamed Gamal El-kholy, Loay Zidan, Iman El-Mahallawi, Ahmed Abd-ElAzim; (2016): “Polyvinyle acetate CNT thermoelectric generator”; The European Advanced Materials Congress (EAMC – 2016) Stockholm-Helsinki-Stockholm courtesy of the Viking Line Cruise from 23-25 August 2016

4. Khodeir Laila, Elsisi Aya, Nagy Mohamed,(2016) ,"Pre-assessment of Metropolitan Areas’ Smart Growth through Agent Based Modelling" , Procedia Environmental Sciences V.34,pp. 245 – 257

5. Khodeir Laila , Aly Dalia , Tarek Shaimaa,(2016), "Integrating HBIM (Heritage Building Information Modeling) Tools in the Application of Sustainable Retrofitting of Heritage Buildings in Egypt", Procedia Environmental Sciences 34 ( 2016 ) 258 – 270

6. Khodeir, Laila, Ahmed, Omar, Feb.(2016), "Risk Management For Multinational Collaborations: Application On The Case Study Of Grand Egyptian Museum", 9th cidb Postgraduate Conference, "Emerging Trends in Construction Organizational Practices and Project Management Knowledge Areas", Cape Town,South Africa,pp.295-308

7. Ashraf Ahmed, Khodeir Laila,(2016), "Efficient Stakeholders Management: The Impact of Applying the Integrated Building Information Modeling/Facility Management Approach, A Literature Review", Second International Conference on sustainability and the future, BUE, pp.414-424

8. Salooma Ahmed , Khodeir Laila (2016), "Analysis Of Root Causes Of Conflicts in Construction Projects In The Middle East", Second International Conference on sustainability and the future, BUE, pp.339-348

9. Raouf Sama , Khodeir Laila, (2016), "Investgating the Impact of Leadership Styles of Multicultural Collaborations Projects on Achieving Projects Success(MCCP)", Second International Conference on sustainability and the future, BUE, pp.3329-338

10. Khodeir Laila, Soliman Heba, (2016)," Sustainable Development of Heritage Areas: Exploring Cyber-Physical Systems as a Potential to Move From 3D Content Model to Bi-dimensional Coordination for Built Heritage Management", BUE ACE1, Sustainable Vital Technologies in Engineering & Informatics, Cairo, Egypt

11. Khodeir Laila, Nagy Gehan, (2016)," Examining the Impacts of integrating Sustainability Values into Creating Spaces for Children Case of SEKEM as a Sustainable Community and Business Model in Egypt" ", BUE ACE1, Sustainable Vital Technologies in Engineering & Informatics, Cairo, Egypt

12. Khodeir Laila, Habib Engy, (2016), "The Emergent Biophilia, An Exploratory Study on the Impact of Integrating “Biophilic Principles” Into Designing Educational Spaces for Children", SBE16-Cairo 2016, GUC.

13. AbdelSalam, S. S., and Azzam, S. A. (2016b). “EPS resistance factors and applications on flexible walls”. ASCE proceedings, Geo-China 2016: geosynthetic civil infrastructure, disaster monitoring, and environmental geotechnics, Shandong, China, pp. 131–138.

14. Elfekey H.M., Maximous G. S., and Bastawrous H.A., "3D Human Proximity Sensor Based on the AC Hum Effect," To appear in Proc. of 2016 IEEE Global Conference on Consumer Electronics (IEEE-GCCE 2016), Kyoto, Japan, 11-14 Oct. 2016.

15. Abdelgawad M. S., Abdelkader S. F., and Bastawrous H.A., " A Robust Fuzzy Logic-Based Real-Time Automatic Camber Detection and Measurement in Hot Rolling Mill," To appear in Proc. of 2016 IEEE Global Conference on Consumer Electronics (IEEE-GCCE 2016), Kyoto, Japan, 11-14 Oct. 2016.

16. Mohammed A. Hassan, Amr A. Abdel Fatah and Abdel-Moez Bayoumi “Cross-Bispectral Analysis for Detection and Diagnosis of Helicopter Trail-Rotor Drive-Shaft Problems” 2016 IEEE Aerospace Conference, March 5-12, 2016, Big Sky, Montana, USA.

17. Attya, A. (2014) ‘National Innovation System in developing countries and barriers to university-industry collaboration – The Egyptian scenario’. Conference on ‘Innovation Systems and the New Role of Universities’ (COSINUS). Bordj-Bou-Arreridj, 23-25 September, Algeria.

18. Ashraf Seleym, "Complementary Phase Coded LFM Waveform for SAR," In the proceedings of IEEE Integrated Communications Navigation and Surveillance (ICNS) Conference, Virginia, USA, April 19-21, 2016

19. Sayed Y. Akl, Ahmed A. Abdel-Rehim, Esraa A. Khafagy, The British University in Egypt (BUE), Tribological Properties of Engine Lubricant With Nano-Copper Oxide as an Additive. SAE 2016 World Congress and Exhibition, 12-14 April 2016, Detroit, Michigan, USA.

20. Ahmed A. Abdel-Rehim, Sayed Y. Akl, The British University in Egypt (BUE) An Experimental Investigation of the Effect of Aluminum Oxide (Al2O3) Nanoparticles as fuel additive on the Performance and Emissions of a Diesel Engine. SAE 2016 World Congress and Exhibition, 12-14 April 2016, Detroit, Michigan, USA.

21. Hany A. Elazab, Sherif Moussa, B. Frank Gupton, and M. Samy El-Shall. “Microwave-Assisted Synthesis of Metal Oxides Nanoparticles: An Efficient Heterogeneous Catalyst for Applications in Pollution Control Technologies”. International Conference on Pollution Control and Sustainable Environment, April 25-26, 2016, Dubai, UAE.

22. Marwa Adel Elsayed, Nourhan Magdy Mohamed, “Ecological Threshold as an approach for balancing carbon metabolism in cities, Thailand”. Thailand 2015. Third International Conference On Advances in Applied Science and Environmental Technology.

23. Alaa Abd Ellatif Fouad, Marwa Adel ElSayed, “Implementation of active urban design to create a dynamic interactive neighborhood in Egypt”. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

24. Ahmed Ayman, Marwa Adel ElSayed, “Sustainable urban development in histroical areas to encourage tourisim”. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

25. Salma K. Amer, Marwa Adel ElSayed, “Practicing new methods and techniques to enhance site selection for ecotourism lodges”. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

26. Mira Ibrahim Helmy, Marwa Adel ElSayed, Ayman H.A. Mahmoud, “Model for suitable locations to appropriate sites for logistics areas Using Geographic Information System. Egypt 2016”. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

27. Omar Farghali, Marwa Adel ElSayed, “Impact of Active Urban Design on Human Obesity to achieve healthy residential active spaces”. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

28. Alaa Abd Ellatif Fouad, Marwa Adel ElSayed, “Implementation of active urban design to create a dynamic interactive neighborhood in Egypt”. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

29. Ahmed Ayman, Marwa Adel ElSayed, “Sustainable urban development in histroical areas to encourage tourisim”. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge’

30. Salma K. Amer, Marwa Adel ElSayed, Practicing new methods and techniques to enhance site selection for ecotourism lodges. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

31. Mira Ibrahim Helmy, Marwa Adel ElSayed, Ayman H.A. Mahmoud, Model for suitable locations to appropriate sites for logistics areas Using Geographic Information System. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

32. Omar Farghali, Marwa Adel ElSayed, Impact of Active Urban Design on Human Obesity to achieve healthy residential active spaces. Egypt 2016. Second International conference on the sustanaibility and future “Chance – Change – Challenge”

33. A.S. Al-Fatesh, A.H. Fakeeha, W.U. Khan, A.A. Ibrahim, M.A. Soliman, A.E. Abaseed, Y. Mohamed, R.L. Al-Otaibi, "Catalytic Methane Decomposition Using Fe Supported Over MgO Catalysts: Effect of Calcination Temperature", The Second UAE Conference on Pure and Applied Chemistry (ECPAC16) March 1-3, 2016.

34. Khalil, Husam, Beleha, Emad, & Mortada, Hesham (2016): Urban conservation of the historic city of Jugol, Ethiopia: a syntactic approach. 1st International Conference on Islamic Heritage Architecture and Art. 17-19 May 2016, Valencia, Spain.

35. Mamdouh Gadalla, Fatma Ashour, Dina Kamel, Dina Aboela, Process Integration is leading/key tool for refineries, energy saving and development projects, Latest Advancements in Refining and PEtrochemiucal Industries, OAPEC, Manama, Kingdom of Bahrain, 17-19 April, 2016.

36. Fatma Ashour, Mamdouh Gadalla, Mostafa Samy, An economical/environmental potential solution for reusing the flare associated gases in Eastern Desert oilfields in Egypt, Latest Advancements in Refining and PEtrochemiucal Industries, OAPEC, Manama, Kingdom of Bahrain, 17-19 April, 2016.

37. Marwa Adel Elsayed, Nourhan Magdy Mohamed, Ecological Threshold as an approach for balancing carbon metabolism in cities, Thailand. Thailand 2015. Third International Conference on Advances in Applied Science and Environmental Technology.

38. Sheweka, S., (2015): ”Reducing Energy Demand for an Apartment through Envelop Renovation. “, Zaytoonah Engineering Conference: Environmental 2016,( ZEC2016),16-18 May , Amman, Jordan .

39. Othman, A. A. E., El-Dalil, K., Fester, F. and Haupt, T. (2015). Integrating Kano Model and Quality Function Deployment as a Hybrid Tool towards Capturing Client Requirements In The Design Process. Proceedings of the 9th Built Environment Conference, Durban, South Africa, 2-4 August 2015, pp. 510- 523. ISBN number: 978-0-620-67120-0.

40. Marwa Adel Elsayed, Nourhan Magdy Mohamed, Ecological Threshold as an approach for balancing carbon metabolism in cities, Tiland. Tiland 2015. Third International Conference On Advances in Applied Science and Environmental Technology.

41. Abdelwahab, N.M. and Othman, A.A.E. (2016). Investigation into the Key Risks Affecting the Development of Mega Sustainable Construction Projects during The Design Phase. Proceedings of Sustainable Mega Projects: Chance- Change-Challenge Conference, The British University in Egypt, Cairo, Egypt, 3-5 May 2016, pp. 355-368.

42. Ally, M.E. and Othman, A.A.E. (2016). Prevention through design: Knowledge management as a novel approach for enhancing the health and safety practices in building design. Proceedings of Sustainable Mega Projects: Chance- Change-Challenge Conference, The British University in Egypt, Cairo, Egypt, 3-5 May 2016, pp. 369-373.

43. Elsaay, H.A. and Othman, A.A.E. (2016). Post-Occupancy Evaluation: A Learning Tool for Improving the Performance of Architecture Design Firms. Proceedings of Sustainable Mega Projects: Chance- Change-Challenge Conference, The British University in Egypt, Cairo, Egypt, 3-5 May 2016, pp. 374-383.

44. Shaheen, N. A. and Othman, A.A.E. (2016). Environmental Ethics As An Approach To Enhance Architecture Design Firms’ Competitiveness Through Delivering Sustainable Designs In Developing Countries: A literature review. Proceedings of Sustainable Mega Projects: Chance- Change-Challenge Conference, The British University in Egypt, Cairo, Egypt, 3-5 May 2016, pp. 384-394.

45. Hafez, M. G. and Othman, A.A.E. (2016). Corporate Social Responsibility as a Marketing Strategy for Branding Architectural Design Firms in Developing Countries: A Literature Review. Proceedings of Sustainable Mega Projects: Chance-Change-Challenge Conference, The British University in Egypt, Cairo, Egypt, 3-5 May 2016, pp. 395-400.

46. Mohamed, M.M. and Othman, A.A.E. (2016). Towards An Integrated Construction Industry Through Bridging The Gap Between Design And Construction: A Lean Perspective: A Literature Review. Proceedings of Sustainable Mega Projects: Chance- Change-Challenge Conference, The British University in Egypt, Cairo, Egypt, 3-5 May 2016, pp. 401-407.

47. Sorial, M.H.H. and Othman, A.A.E. (2016). Integrating Disabled Architects as An Innovative Approach For Achieving Competitive Advantage In Architectural Design Firms. Proceedings of Sustainable Mega Projects: Chance-Change-Challenge Conference, The British University in Egypt, Cairo, Egypt, 3-5 May 2016, pp. 408-413.

48. Marianne N.Guirguis, Khaled M.Dewidar, Shaimaa M.Kamel, Maged F. Iscandar. ‘A Semiotic Investigation of the Architecture of the Coptic Church: A Case Study of the Church of Saint Mercurius (Abu Sayfayn) in Old Cairo”, The International Conference on Sustainable Mega Projects, May 2016.

49. Elshamy, A., Loveday, D., and Eames, P., “Façade Based Investigation towards Lower Cooling Loads in a Typical Low-Rise Dwellings in Egypt” in Proceedings of SusTEM 2015 (Sustainable Thermal Energy management Network) International conference, NewCastle, UK, 7-9 Jun, 2015, pp. 18-28

50. A.H. Fakeeha, A.A. Ibrahim, A.S. Al-Fatesh, W.U. Khan, M.A. Soliman, Y. A. Mohammed, R.L. Al-Otaibi, A.E. Abasaeed, “Fe supported Alumina catalyst for methane decomposition: Effect of Co coupling”, Fourth International Conference on Energy, Water and Environmental Sciences, Ras Al Khaimah, United Arab Emirates, December 15-17, 2015.

51. A.A. Al-Rabiah, A. Ajbar, M.A. Soliman, "Mathematical modeling of gas permeation in nanoporous carbon membranes", 65th Canadian Chemical Engineering Conferenece, Calgary, Canada, 4-7 October 2015.

52. Elfekey, H.M. and Bastawrous, H.A., "Granite-based touch-sensing floor for machinery safety and exergaming," in Proc. of 2015 IEEE Global Conference on Consumer Electronics (IEEE-GCCE 2015), Osaka, Japan, 27-30 Oct. 2015, pp. 593-594.

53. Elfekey, H.M., Bary, E.M.Abdel; Bastawrous, H.A., "Flexible ITO-free touch panel based on the effects of extremely low frequency electromagnetic fields," in Proc. of 2015 IEEE International Symposium on Consumer Electronics (IEEE-ISCE 2015), Madrid, Spain, 24-26 Jun. 2015, pp. 1-2.

54. Mamdouh Gadalla, A Novel Graphical Technique for Pinch Analysis Applications: Mass and Energy Integration, 3rd World congress on Petrochemistry and Chemical Engineering, Atlanta, USA, 30 November-02 December, 2015.

55. Bahy Abdel-Mesih, Ahmed Abdelrehim, Amr Khobeiz. Comparative Analysis Between Water and Nanofluids as Working Fluids in Photovoltaic Thermal Collectors.

56. Dewidar Khaled, Mariane Nabil “Air Purification Towers: A Modern Concept in Architectural Sustainability”, Middle East Green Building Summit Cairo, April 2015.

57. Dewidar, Khaled “Bridging the Gap between Sustainable Architecture Design Principles and Elements of Defining Art of Sustainability”, The 7th International Conference on Sustainable Development in Building and Environment, University of Reading, Reading, United Kingdom, July 2015.

58. AbdelSalam, S. S., Azzam, S. A., and Abdel-Awad, A. S. (2015). “Laboratory Characterization and Numerical Modeling of EPS Geofoam”. ICASGE 15, International Conference on Advances in Structural and Geotechnical Engineering, April 2015, Hurghada, Egypt.

59. Azzam, S. A., and AbdelSalam, S. S. (2015). “EPS Geofoam to Reduce Lateral Earth Pressure on Rigid Walls”. ICASGE 15, International Conference on Advances in Structural and Geotechnical Engineering, April 2015, Hurghada, Egypt.

60. Elfekey, H.M.; Bary, E.M.Abdel; Bastawrous, H.A., "Flexible ITO-free touch panel based on the effects of extremely low frequency electromagnetic fields," in Proc. of 2015 IEEE International Symposium on Consumer Electronics (IEEE-ISCE 2015), Madrid, Spain, 24-26 Jun. 2015, pp. 1-2

61. K. M. Abozeid, M. M. Aboudina and A. H. Khalil, "8-bit 22nW SAR ADC using output offset cancellation technique," 2015 11th International Computer Engineering Conference (ICENCO), Cairo, Egypt, 2015, pp. 76-79.

62. K. M. Abozeid, M. M. Aboudina and A. H. Khalil, "8-bit 22nW SAR ADC using output offset cancellation technique," 2015 11th International Computer Engineering Conference (ICENCO), Cairo, Egypt, 2015, pp. 76-79.

63. Integration Modification for IGCC “Integrated Gasification Combined Cycle”, Pres'15, Kuching, Malaysia, 23-27 Aug. 2015.

64. Mamdouh Gadalla, “A New Graohical Method For Pinch Analysis Applications: Energy Integration”, 12th International Conference on Chemical & Process Engineering, Milan, Italy, 19-22 May, 2015.

65. Bahy Abdel-Mesih, Ahmed Abdelrehim, Amr Khobeiz. Comparative Analysis Between Water and Nanofluids as Working Fluids in Photovoltaic Thermal Collectors.

66. Y. Al-Zeghayer, M. Soliman,ad , S. Al-Mayman “Development of a MoVNbPd catalyst supported on titania for the partial oxidation of ethane”, 21st INTERNATIONAL CONGRESS OF CHEMICAL AND PROCESS ENGINEERING CHISA 2014, Prague,23-27 August 2014

67. Omar Yasser, Mamdouh Gadalla, Fatma Ashour. (2014). Simulation of Biomethanol Production from Green Syngas through Sustainable Process Design. Proceedings of the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, Vienna, August 28-30, 2014.

68. Omar Yasser, Mamdouh Gadalla, Fatma Ashour, Simulation Design of Methanol Sustainable Production from Rice Straw Gasification, The 13th Mediterranean Congress of Chemical Engineering, Barcelona, September 30 - October 3, 2014.

69. Marwa Obayya and F.E.Z. Abou-Chadi, “Automatic Classification of Sleep Stages Using EEG Records based on Fuzzy C-Means (FCM) Algorithm” Proc. of the thirty-first National Radio Science Conf. (NRCS), Cairo, April 2014.

70. Vadim V. Silberschmidt, Sameh M.A. Mahdy, Moustafa A. Gouda, Ahmed Naseer, Agostino Maurotto, Anish Roy, Surface-roughness Improvement in Ultrasonically Assisted Turning, Procedia CIRP, Volume 13, 2014, Pages 49-54, ISSN 2212-8271, http://dx.doi.org/10.1016/j.procir.2014.04.009.

71. Ahmad M. Mohammad, Gumaa A. El-Nagar, Islam M. Al-Akraa, Mohamed S. El-Deab “A stable Nickel Oxide Nanoparticel Ternary-based Anodic Catalyst for the Dirct Formic Acid Fuel Cells”, Bahgat E. El-Anadouli, International Conference on Industry Academia Collaboration (IAC2014) (paper no. 46), Fairmont Hotel, Cairo, Egypt, March 3-5, 2014.

72. G. Nowihy, A. M. Mohammad, M. Khalil, M. S. El-Deab, “Development of nickel and manganese oxides nanostructured binary modified anodes for the direct methanol fuel cells”, International Conference on Industry Academia Collaboration (IAC2014) (paper no. 58), Cairo, Egypt, March 3-5, 2014.

73. Islam M. Al-Akraa, Ahmad M. Mohammad, Mohamed S. El-Deab “Development of Gold Nanoparticles-based Electrocatalysts for the Oxygen Evolution Reaction in Alkaline Water Electrolysis”, Bahgat E. El-Anadouli, International Conference on Industry Academia Collaboration (IAC2014) (paper no. 62)., Fairmont Hotel, Cairo, Egypt, March 3-5, 2014.

74. G. El-Nagar, A. M. Mohammad, M. S. EL-Deab, B. E. El-Anadouli, “Electrocatalysis by nanoparticles: Oxidation of formic acid at novel Pt/NiOx nanoparticles-based binary catalysts”, International Conference on Industry Academia Collaboration (IAC2014), Cairo, Egypt, March 3-5, 2014.

75. Mohamed A. Hassan, Taher A. Salah , Ahmad M. Mohammad, Bahgat E. El-Anadouli, “Adsorptive removal of nickel (II) ions from aqueous solutions using hydroxyapatite/chitosan nanocomposites”, 2nd International Conference on Advanced Basic & Applied Sciences (ABAS-II), Organized by Faculty of Postgraduate Studies for Advanced Sciences Beni-Suef University Sokhna, Egypt, 2-4 April 2014.

76. A. M. Mohammad, G. A. El-Nagar, I. M. Al-Akraa, M. S. El-Deab, B. E. El-Anadouli, “Towards improving the catalytic activity and stability of platinum-based anodes in direct formic acid fuel cells", 13th international conference on clean energy, WOW Istanbul Hotels & Convention Center, Istanbul / Turkey, June 8-12, 2014.

77. I. M. Al-Akraa, A. M. Mohammad, M. S. El-Deab, B. E. El-Anadouli “On catalytic activity of palladium nanoparticles-based anodes towards formic acid electrooxidation: effect of electrodeposition potential", , 13th international conference on clean energy, WOW Istanbul Hotels & Convention Center, Istanbul / Turkey, June 8-12, 2014.

78. G. A. M. El-Nagar, A. M. Mohammad, M. S. El-Deab, B. E. El-Anadouli “Electrocatalytic activity of novel binary modified platinum surfaces with cobalt and nickel oxides nanostructures toward formic acid oxidation”, 13th international conference on clean energy, WOW Istanbul Hotels & Convention Center, Istanbul / Turkey, June 8-12, 2014.

79. S. M. El-Refaei, G. A. M. El-Nagar, A. M. Mohammad, M. S. El-Deab, B. E. El-Anadouli, “Electrooxidation of small organic molecules at PT-based electrodes modified with nickel oxide nanostructured”, 13th international conference on clean energy, WOW Istanbul Hotels & Convention Center, Istanbul / Turkey, June 8-12, 2014.

80. M. G. A. Elmoghny , A. M. Mohammad, M. S. El-Deab, A. Mazhar, ”Enhanced electrocatalysis of formic acid electro-oxidation at poly-analine/platinum nanoparticles modified electrodes”, 13th international conference on clean energy, WOW Istanbul Hotels & Convention Center, Istanbul / Turkey, June 8-12, 2014.

81. I. M. Al-Akraa, A. M. Mohammad, M. S. El-Deab, B. E. El-Anadouli (2014) “On the catalytic activity of palladium nanoparticles-based anodes towards formic acid electro-oxidation: Effect of electrodeposition potential",13th international conference on clean energy, WOW Istanbul Hotels & Convention Center, Istanbul, Turkey, June 8-12, 2014.

82. S. M. El-Refaei, G. A. M. El-Nagar, A. M. Mohammad, M. S. El-Deab, B. E. El-Anadouli (2014) “Electro-oxidation of small organic molecules at PT-based electrodes modified with nickel oxide nanostructures”,13th international conference on clean energy, WOW Istanbul Hotels & Convention Center, Istanbul, Turkey, June 8-12, 2014.

83. El-Deab M. S., El-Nagar G. A., Mohammad A. M., El-Anadouli B. E., (2014) “Electrocatalytic oxidation of formic acid at novel Pt/NiOx nanoparticle-based binary catalysts: Tolerance to poisoning by halides”, Electrochemistry 2014 Basic Science and Key Technology for Future Applications, Mainz, Germany, Sept. 22-24, 2014.

84. Dewidar, Khaled “Living Skins: A new concept of Self Adaptive Building Envelope Regulating System”, International Conference on Design Methodologies, Mimar Sinan Fine Arts University, Istanbul, Turkey, November 2014.

85. Dewidar, Khaled “Beauty of Wholeness and Beauty of Partiality. New Trends Defining the concept of Beauty in Architecture in Terms of Sustainability and Computer Aided Design”, International conference on Sustainability, Teaching and Education, The international Association for Development of the Information Society,Taipei, Taiwan, December 2014.

86. Kh. S. Mekheimer, S. R. Elkomy, S. I. Abdelsalam, ‘¬Effects of Compressibility, Space Porosity, and Slip Flow on Peristaltic Transport of MHD Jeffrey Fluid through an Annulus: Aerospace Field Applications’. The 7th International Conference on Engineering Mathematics and Physics ICMEP-7, 27-29 May 2014. Military Technical College Kobry Elkobbah, Cairo, Egypt (paper accepted for oral presentation).

87. AbdelSalam, S. S. and El-Naggar, M. E. (2014). “LRFD for Large-diameter Bored Piles in Egypt”. ASCE, Geo-Congress 2014, Geo-characterization and Modeling for Sustainability, pp. 900–910.

88. AbdelSalam, S. S. (2014). “Repair of a Tilted Building Resting on a Deep Soft Clay Using Micropiles and Raft”. ASCE, Geo-Congress 2014, Geo-characterization and Modeling for Sustainability, pp. 4280–4292.

89. Duong, V.-H., Bastawrous, H.A., Lim, K., See, K.W., Zhang, P., Dou, S.X., “SOC estimation for LiFePO4 battery in EVs using recursive least-squares with multiple adaptive forgetting factors,” in Proc. of the International Conference on Connected Vehicles & Expo (ICCVE 2014), Vienna, Austria, 3-7 Nov. 2014, pp. 516-517.

90. Ashraf Seleym, "A New Incoherent Compression of Complementary Code Pairs for Laser Ranging and Detection," The International Conference on Electrical Engineering and Applications (WCECS 2014), San Francisco, USA, 22-24 October 2014.

91. Ashraf Seleym, "Constant Envelope Multiple Trellis-Coded MSK for Phase Coded Waveforms in Complementary Sequences Sensor Pulse Compression," In the proceedings of the 2014 IEEE International Conference on Electro/Information Technology (EIT 2014), Milwaukee, WI, USA, June 5-7, 2014.

92. Ashraf Seleym, "A New Noncoherent Radar Pulse Compression Based on Complementary Sequences," In the proceedings of the IEEE Radar Conference, OH, USA, May 19-23, 2014.

93. Ashraf Seleym, "Pulse Compression Waveform for Complementary Codes Based on Minimum Shift Keying," Proceedings of IEEE International Conference on Electronics and Communication Systems (ICECS 2014), Coimbatore, India, Feb. 13-14, 2014.

94. Ashraf Seleym, "High-rate Hidden Communications Channel: A Multi-dimensional Signaling Approach," Proceedings of IEEE Integrated Communications Navigation and Surveillance (ICNS) Conference, Virginia, USA, April 8-10, 2014.

95. Ashraf Seleym, "A New Noncoherent Radar Pulse Compression based on Complementary Sequences with Direct Sequence Signaling," Proceedings of IEEE Integrated Communications Navigation and Surveillance (ICNS) Conference, Virginia, USA, April 8-10, 2014.

Thesis by BUE TAs


Thesis by BUE TAs (June – November) 2017

1.Said, A. (2017) “Investigation of appreciate new stainless steels developed for industrial and nuclear applications” thesis discussed for fulfillment for the requirements of master degree in physics. Ain Shams University.

2. Maher, A. (2017) “Monte-Carlo Simulation Aided Design and Preparation of Glasses for Radiation Shielding” thesis discussed for fulfillment for the requirements of master degree in physics. Ain Shams University.

3. Mansour, M. (2017) ‘Statistical Inferences Using Censored Samples from Weibull – Gamma Distribution, thesis discussed for fulfillment for the requirements of the degree of doctor of philosophy , Al- Azhar University.

4. Hoda A. Elsawy, (2017) Novel study of some drugs and their complexes with certain transition metals “synthesis, characterization and biological activity” thesis discussed for fulfillment for the requirements of the degree of doctor of philosophy, Ain Shams University

Thesis by BUE TAs (2016)

1. Rana Badran (2016) “Wind Turbine Condition Monitoring System using Renewable Energy Solutions” Thesis discussed for fulfillment for the requirements of MSc degree in Renewable Energy, The British university in Egypt.

2. Reem Mohamed Salah (2016) “Physico-Mechanical properties of NBR/EPDM rubber blend loaded with different types of compatbilizers”, thesis discussed for fulfillment for the requirements of the degree of master of science in chemical engineering, Cairo University.

3. Dina Mohamed Aboelela Kotb (2016) “Environmental procee design of styrene production plant”, thesis discussed for fulfillment for the requirements of the degree of master of science in chemical engineering, Minia University.

4. Anis, M. (2014) “The impact of internal corporate governance mechanisms on firm’s financial performance. Evidence from the Egyptian Listed Companies.”, thesis discussed for fulfillment for the requirements of the degree of doctor of philosophy , Loughborough University.

5. Amr M. Ibrahim (2015) “Effect of Using Smooth Glass Fiber Reinforced Bars on the Response of Concrete Beams.”, thesis discussed for fulfillment for the requirements of the degree of Master of Science, Ain Shams University.

Books & Book Chapters

1. Yehia A. Bahei-El-Din, Mostafa Shazly, Serag Salem, “Impact Resistance of Sandwich Plates,” Chapter 16 in Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, p. 471-489, edited by Vadim V. Silberschmidt, Woodhead Publishing Limited, Elsevier, 2016.

2. Adel, Hassan, & El Barmelgy. (2015) “Land Suitability Analysis for Urban Green Areas Using New Methods and Techniques”. ISBN-10: 3659410721, ISBN-13: 978-3659410727. Publisher: LAP LAMBERT Academic Publishing (August 25, 2015).

3. Dabaieh, M., (2015). “More than vernacular: vernacular architecture between past tradition and future vision”. 1 ed. Lund: Media-Tryck.

4. Dabaieh, M., Makhlouf, N., Housny, O., (2016). “Roof top PV retrofitting: a rehabilitation assessment towards nearly zero energy buildings in remote off grid vernacular settlements in Egypt”. Solar Energy, 123, pp. 160-173.

5. Dabaieh, M., Elbably, A., (2015). “Ventilated Trombe wall as a passive solar heating and cooling retrofitting approach; a low-tech design for off-grid settlements in semi-arid climates”. Solar Energy, 122, pp. 820-833.

6. Dabaieh, M., Wanas, O., Hegazy, M. & Johanson, E., (2015). “Reducing cooling demands in a hot dry climate: A simulation study for non-insulated passive cool roof thermal performance in residential buildings”. Energy Build, 89 (1), pp. 142-152.

7. Dabaieh, M., Mamdouh S., (2015). “Building with Reeds: Revitalizing a building tradition for low carbon building practice”. CIAV-ICTC 2015: ICOMOS Thailand International Conference. 6-9 November, Bangkok, Thailand

8. Dabaieh, M., Borham, A., (2015). “Acclimatization measures for temporary refugee shelters in hot arid climates; low-tech mobile solution using Bedouin tents”. PLEA, Architecture in (R) Evolution, 9-11 September, Bologna, Italy. ISBN 978-88-941163-1-1

9. Husam Khalil “HBIM and Environmental Simulation: Possibilities and Challenges”. Taylor & Francis/Routledge). In Ararici et. Al. (2017): Heritage Building Information Modelling. Routledge. ISBN 978-1-138-64568-4.

10. Adams, J., Khan, A & Raeside, R. (2014) ‘Research Methods for Business & Social Science Students’ – SAGE International Publishing, London. ISBN 978-0-7619-3589-6 2nd ed. Feb

11. W. Knoll, A. Kasry, J Dostalek (2015) Biofunctional Surfaces - The Nano-Micro Interface: Bridging the Micro and Nano World - Wiley‐VCH Verlag GmbH & Co. KGaA. ISBN: 978-3-527-33633-3 January 2015

12. S. I. Abdelsalam, ‘Some Problems for Peristaltic Transport’ Lap Lambert Academic Publishing, Aug. 2015. Book’s ISBN: 978-3-659-70584-7.

Reports

1. Nadia Hegazi and Fatma E.Z. Abou-Chadi, “Internet of Things:Technology Prospectives and Future Research Directions” A research roadmap 2014-2017. Specific Council of Information and Communications Technology, The Academy of Science and Research Technology, August 2014.

2. Amr Abdel kader Abdel Fatah “Reverse Osmosis desalination projects in Egypt and CSP power plants“The Academy of Science and Research Technology, June 2016.

3. Nadia Hegazi and Fatma E.Z. Abou-Chadi, “Internet of Things:Technology Prospectives and Future Research Directions” A research roadmap 2014-2017. Specific Council of Information and Communications Technology, The Academy of Science and Research Technology, August 2014.

4. Nevin Darwish, Nadia Hegazi and Fatma E.Z. Abou-Chadi, “Egypt Explosives and Mines Detection Research Roadmap” A research roadmap 2014-2017. Specific Council of Information and Communications Technology, The Academy of Science and Research Technology, April 2015.

Contact US

Address

El Sherouk City , Suez Desert Road , Cairo 11837 - P.O. Box 43

Phone

19283 , +202 26890000 , +202 26300013 / 14 / 15 / 16 / 17 / 18

Mail

info@bue.edu.eg

Website

http://www.bue.edu.eg

MAP

x